Bissoy.com
Doctors Medicines MCQs Q&A

Under the conditions of maximum reactive power output, the reactive power flowing out of an alternator is __________

Under the conditions of maximum reactive power output, the reactive power flowing out of an alternator is __________ Correct Answer negative

The alternator will always absorb the reactive power to meet its flux requirements to generate the real power.

Related Questions

Under the condition for 3 phase alternator, maximum active power output, the delivered reactive power output is ________ while under maximum reactive power output, the delivered reactive power is ________
To connect an incoming alternator to a running alternator certain conditions must be satisfied for synchronism. Which of the following is NOT one of the conditions?
I1 is the current flowing in the first mesh. I2 is the current flowing in the second mesh and I3 is the current flowing in the top mesh. If all three currents are flowing in the clockwise direction, find the value of I1, I2 and I3.
The reactive power flow is outward from an alternator, then the alternator works at ____________
Under the conditions of maximum values of active or reactive power, a synchronous machine always absorbs reactive power.
Referring this circuit, determine the maximum output voltage when a single pulse is applied as shown. The total resistance is 60 Ω.
Time Response of Reactive Circuits mcq question image
An alternator, with synchronous reactance of 0.8 pv is connected to an IBB at rated voltage. With its excitation emf adjusted to 1.3 pv, the alternator delivers an output of 0.5 pv. The load angle is __________
An alternator is being synchronised to the power station bus bars whose frequency is 50 Hz. If the bulb of the synchroscope glows with maximum brightness, the frequency of the alternator is:
A system consists of an alternator having reactance of 0.5pu connected to an infinite bus through a series of reactance of 1 pu. The generator terminal voltage of IBB is 1 pu and that of 1.2 pu. The emf induced in the alternator will have the phase difference with respect to reference for the maximum power transfer is _______________
An incoming alternator is to be synchronised with an already operating alternator. Which of the following conditions is NOT necessary to be satisfied?