Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the r.m.s value of the output current having an amplitude of 2 A for CSI.

Calculate the r.m.s value of the output current having an amplitude of 2 A for CSI. Correct Answer 4 A

The r.m.s value of the output current having an amplitude of 2 A for CSI is 2A. The waveform for output current is a square wave. The r.m.s value of the square wave is its amplitude.

Related Questions

A three-winding transformer is connected to an AC source with 50 V rms as shown in the following figure. Voltages induced in the secondary windings are 2 V rms and 8 V rms. The output rms voltage V0 is,
Calculate the r.m.s value of the fundamental component of the output current having an amplitude of 3 A for CSI.
Seven people A, B, C, D, E, F and G live on separate floors of a 7-floor building. Ground floor is numbered 1, first floor is numbered. 2 and so on until the topmost floor is numbered 7. Each one of these having a different cars-Cadillac, Ambassador, Fiat, Maruti, Mercedes, Bedford and Fargo but not necessarily in the same order. Only three people live above the floor on which A lives. Only one person lives between A and the one having a car Cadillac. F lives immediately below the one having a car Bedford. The one having a car Bedford lives on an even-numbered floor. Only three people live between the ones having a car Cadillac and Maruti. E lives immediately above C. E is not having a car Maruti. Only two people live between B and the one having a car Fargo. The one having a car Fargo lives below the floor on which B lives. The one having a car Fiat does not live immediately above D or immediately below B. D does not live immediately above or immediately below A. G does not have a car Ambassador. Question : How many people live between the floors on which D and the one having a car Bedford ?
A transformer has a primary voltage of 120 V rms and a secondary voltage of 25 V rms. If the secondary current is 1A rms, what is the primary current?
The ratio of the RMS amplitude of the higher order harmonic frequencies to the RMS amplitude of the fundamental frequency is commonly called __________
For an SCR the average & rms values of current are I/4 & I/2 respectively. Calculate the average on-state current rating (ITAV). Take maximum RMS on-state current = 35 A.
In a parallel RL circuit, there are 3 A rms in the resistive branch and 3 A rms in the inductive branch. The total rms current is
The ratio of the RMS value of additional frequency components in output to the RMS value of the original output of the amplifier is called __________
A step-down delta-star transformer, with per-phase turns ratio of 5 is fed from a 3-phase 1100 V source. The secondary of this transformer is connected through a 3-pulse type rectifier, which is feeding an R load. The power delivered to the load is 6839.3 Watts. The maximum value of the load current is √2 x 22 A. Fin, the rms value of output voltage Vo (rms)
Find the average value of output current for a 1-phase HW diode rectifier with R load, having RMS output current = 100A.