Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A sinusoidal input voltage Vin of frequency ω is fed to the circuit shown in the figure, where C1 ≫ C2. If Vm is the peak value of the input voltage, then output voltage (Vout) is
Electronics mcq question image
P. A weir is a hydraulic structure where majority or the entire ponding is achieved by a raised crest and smaller part or nil part by the shutters. Q. A weir is a hydraulic structure that is made by constructing the width of the channel only. R. A barrage is a hydraulic structure that is made by creating a choking condition only. S. A barrage is a hydraulic structure where majority or the entire ponding is achieved by a shutter and smaller part or nil part by the raised crest. Identify the correct statements in the above.
Calculate the crest factor if the peak value of current is 10A and the rms value is 2A.
Consider a capacitor and resistor connected in series to a sinusoidal voltage source. The voltage across the capacitor lags the voltage across the resistor by an angle θ degrees. What is the value of θ?
The discharge passing over an ogee spillway is given by (where, L is effective length of spillway crest and H is the total head over the spillway crest including velocity head.)
When the crest of one wave falls on the crest of the second wave, and trough of one wave falls on the trough of the second wave, this phenomenon is called
Statement (I): The ogee spillway is a control weir having an S-shaped crest profile which provides a high discharge coefficient without causing cavitations. Statement (II): The crest profile of ogee spillway conforms to the lower nappe of flow over a ventilated sharp-crested weir and ensures a constant discharge coefficient for all heads.
A sinusoidal current sheet in a rotating electrical machine has peak value along q-axis. The peak value of sinusoidal MMF would be ___________
As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at
The ratio of the discharge over a trapezoidal crest to a rectangular crest of Sarda falls of identical parameters, is