Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the output frequency for the two-pulse converter if the supply frequency is 20 Hz.

Calculate the output frequency for the two-pulse converter if the supply frequency is 20 Hz. Correct Answer 40 Hz

The output of a two-pulse converter consists of two pulses in one cycle. The output frequency of the two pulse converter is 2×supply frequency=2×20=40 Hz.

Related Questions

In case of three-phase dual converter, one of the converter circuits is fired at an angle of 60°. For both the converter circuits to have equal average output voltage, what is the value of the firing angle for the other converter circuit?
Calculate the output frequency for the six-pulse converter if the supply frequency is 10 Hz.
একজন চাকরিজীবীর আয় ও ব্যয়ের অনুপার ২০ঃ ১৫ হলে, তার মাসিক সঞ্চয় আয়ের শতকরা কত অংশ?
একটি ট্রান্সফরমারের প্রাইমারি ও সেকেন্ডারি তারের ঘূর্ণনের অনুপাত 20ঃ 1 এবং সেকেন্ডারিতে 20 omega রোধ লাগানো আছে। যদি প্রাইমারিতে 220 V প্রয়োগ করা হয় তাহলে এর মধ্যে বিদ্যুৎ প্রবাহ হবে-
In case of synchronous motor, which of the following are true? a. Synchronous motor is not self-starting b. If the rotor poles are excited by field current and the stator terminals are connected to AC supply, motor vibrates. c. Variable frequency supply is used to start synchronous motor. d. By using frequency converter, a synchronous motor can be brought from standstill to its desired speed.
A three-phase semi-converter circuit is given a supply of 400 V. It produces at the output terminals an average voltage of 381 V. Find the rectification efficiency of the converter circuit.
Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market
For an N bit F – V converter, to ensure less than ½ LSB output ripple, the time constant T of simple RC low pass filter must be at least (Where T0 is the output period of the n bit converter):
The output of a 3-stage Johnson (twisted-ring) counter is fed to a digital-to-analog (D/A) converter as shown in the figure below. Assume all states of the counter to be unset initially. The waveform which represents the D/A converter output Vo is
Consider the following statements: 1. The voltage developed across the OFF switches of the half-bridge converter is the maximum dc-link voltage. 2. In the full-bridge converter, the voltage across the primary of the transformer is the dc link voltage. 3. The voltage developed across the OFF switches of the full-bridge converter is half the maximum dc-link voltage. Which of the above statements are correct?