Bissoy.com
Doctors Medicines MCQs Q&A

In the below shown diode rectifier circuit, The diodes D1, D2 & D3 are connected to phases R,Y and B respectively as shown The phase sequence is R-Y-B. The diode D1 would conduct from

In the below shown diode rectifier circuit, The diodes D1, D2 & D3 are connected to phases R,Y and B respectively as shown The phase sequence is R-Y-B. The diode D1 would conduct from Correct Answer 30 to 150 degrees

It conducts from 30 to 150, for 90 degrees. D1 starts conducting first as it will be the most positive as it is connected to the R phase.

Related Questions

In the given diode rectifier circuit, The diodes D1, D2 & D3 are connected to phases R,Y and B respectively as shown. The phase sequence is R-Y-B. The diode D1 would conduct from
In the below shown diode rectifier circuit, The diodes D1, D2 & D3 are connected to phases R,Y and B receptively as shown The phase sequence is R-Y-B. The diode D3 conducts from
A 3-phase 6-pulse diode rectifier is shown below with phase sequence R-Y-B. The negative group of diodes (D4, D5, D6) conduct in sequence (from ωt = 0°)
From the diode rectifier circuit shown below, with phase sequence R-Y-B, diodes D3 & D5 conduct when
When an electric current coil of a wattmeter is connected to the electric current path R and the voltage coil is connected between the electric current R path and the neutral side of the balanced three phase supply, it shows 10 kW. The line voltage along the phase sequence RYB is 400 V. The current drawn by the current path is 54 A. What is the new reading of the wattmeter if the voltage coil is connected between the lines B and the Y paths, even if the electric current coil is continuously present in the line R?
A three-phase balanced delta connected load of (4+j8) Ω is connected across a 400V, 3 – Ø balanced supply. Determine the phase current IR. Assume the phase sequence to be RYB.
Consider the following diodes: 1. Gunn diode 2. Schottky diode 3. Crystal diode 4. Tunnel diode Which of these can be used as detector diodes?
If a phase sequence indicator rotates clockwise for a phase sequence of RYB, then what happens when the phase sequence is changed to BRY?
Which of the following statements is/are correct with respect to a Scott-connected transformer? I. It can do 3-phase to 2-phase conversion II. It can do 2-phase to 3-phase conversion III. It can do 2-phase to 4-phase conversion IV. It can do 3-phase to 4-phase conversion
In the given circuit, if the diode D2 is a Germanium diode and all other diodes are Silicon diodes, then which of the following statements is true?