Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

How many electrodes does the GSR Sensor need?
What kind of sensor is the GSR Sensor?
Statement (I): To use a sensor, we generally need to add signal conditioning circuitry, such as circuits which amplify and convert from analog to digital, to get the sensor signal in the right form, take account of any non-linearities, and calibrate it. Statement (II): A smart sensor is integrated with the required buffering and conditioning circuitry in a single element and provides functions beyond that of just a sensor.
What can the GSR Sensor’s function be applied to?
If to one pair of electrodes one potential with one sign is applied, which of the following is applied to the other pair of electrodes?
What will happen if we supply a voltage of 25V to the Vcc of the GSR Sensor?
Which of the following reference electrodes are used as internal and external reference electrodes in combination electrodes?
For the circuit given below, the inductance measured across the terminals 1 and 2 was 15 H with open terminals 3 and 4. It was 30 H when terminals 3 and 4 were short-circuited. Both the inductors are having inductances 2H. The coefficient of coupling is ______________
A voltage source VAB = 4 sin wt is applied to the terminals A and B of the circuit shown in the given figure. The diodes are assumed to be ideal. The impedance by the circuit across the terminals A and B is
A displacement sensor (a dial indicator) measures the lateral displacement of a mandrel mounted on the taper hole inside a drill spindle. The mandrel axis is an extension of the drill spindle taper hole axis and the protruding portion of the mandrel surface is perfectly cylindrical measurements are taken with the sensor placed at two positions P and Q as shown in the figure. The readings are recorded as Rx = maximum deflection minus minimum deflection, corresponding to sensor position at X, over one rotation. If RP = RQ > 0, which one of the following would be consistent with the observation?