Bissoy.com
Doctors Medicines MCQs Q&A

If the observed diameter of a shaft is 20 mm, 21 mm, 23 mm, 22.5 mm, 24 mm. What is the mode of the observed data?

If the observed diameter of a shaft is 20 mm, 21 mm, 23 mm, 22.5 mm, 24 mm. What is the mode of the observed data? Correct Answer There is no mode

The observed diameter of a shaft is 20 mm, 21 mm, 23 mm, 22.5 mm, 24 mm. As all the values occur once, there is no mode in the observed data set values. Mode is defined as the value which occurs most the number of times.

Related Questions

Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is __________ as that of shaft 'A'.
Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter $$\frac{{\text{D}}}{2}$$. The strength of hollow shaft in torsion is _________ as that of solid shaft.
Two shafts 'A' and 'B' are made of same material. The shaft 'A' is of diameter D and shaft 'B' is of diameter $$\frac{{\text{D}}}{2}.$$ The strength of shaft 'B' is _________ as that of shaft 'A'
Two solid shafts 'A' and 'B' are made of the same material. The shaft 'A' is of 50 mm diameter and shaft 'B' is of 100 mm diameter. The strength of shaft 'B' is _________ as that of shaft A.
From the following data, calculate the critical speed of the shaft in rps. Shaft diameter = 5mm length = 200mm Mass of disc = 50Kg at centre of shaft E = 200GN/m2 Centre of disc at 0.25m away from centre of axis of shaft.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.