Related Questions

The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is a degasser in this system. Calculate the amount of SBA resin required for the following data. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 30 ppm as CaCO3 CO2: 45 ppm as CaCO3 EMA: 100 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
Calculate the frequency for maximum drift of crystal if The crystal has a stability of 6300 ppm and an output frequency of 268.2MHz and frequency multiplier chain with factors of 2, 3, and 3.
The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is no degasser in this system. Calculate the amount of resin required for the following information. M Alkalinity: 100 ppm as CaCO3 P Alkalinity: 100 ppm as CaCO3 Silica: 45 ppm as CaCO3 CO2: 45 ppm as CaCO3 Capacity: 37 Kg/m3 Correction factor: 0.9 Flow rate: 35 m3/hr Operation hours: 10 hrs
What is the maximum frequency of a 16-MHz crystal with a stability of 200 ppm?
Provided a cascade multistage amplifier network, their pole frequencies obtained are f1=10Mhz, f2=12Mhz, f3=20Mhz, f4=16Mhz. What is the approximate higher cutoff frequency of the cascaded network?
Find out the characteristic crystal length if Mass of the crystal m= 10g Density of crystal is d= 5g/m3 Area of crystal A= 10m2
Find out the characteristic crystal length if Mass of the crystal m= 10g Density of crystal is d= 6g/m3 Area of crystal A= 10m2
Find out the characteristic crystal length if Mass of the crystal m= 16.67g Density of crystal is d= 5g/m3 Area of crystal A= 10m2
Find out the characteristic crystal length if Mass of the crystal m= 10g Density of crystal is d= 2g/m3 Area of crystal A= 10m2
Find out the characteristic crystal length if Mass of the crystal m= 10g Density of crystal is d= 1g/m3 Area of crystal A= 10m2