Bissoy.com
Doctors Medicines MCQs Q&A

What is the MTBF of a solid state rate gyro?

What is the MTBF of a solid state rate gyro? Correct Answer 50,000 to 100,000 hrs

Solid state rate gyros are very reliable sensors with an MTBF in the region of 50,000 to 100,000 hours – ‘fit and forget’ devices. Also, they are mounted internally and suffer less damage from the environment.

Related Questions

“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
Why is a tuning fork gyro better than the vibrating cylinder type gyro?
Which of the following statements are true/false?
1. A minimum rate of wages for the time spent by employees for the production of output is minimum time rate.
2. Minimum piece rate is the rate based on the quantity of the output employees have produced.
3. The guaranteed time rate is a minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis.
4. A minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis is overtime rate.
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
Consider a given volume of liquid at a temperature T below Tm with a free energy G’. If some of the atoms of the liquid cluster together to form a small sphere of solid, the free energy of the system will change to G, given by________ (Assume V1 volume of the solid sphere, V2 volume of liquid, A is the solid/liquid interfacial area, γ solid/liquid interface free energy, G1 and G2 are the free energies per unit volume of solid and liquid respectively).
S1: Different countries show different pattern of growth.
P: Many others have a high birth rate with a low death rate.
Q: Some have a high birth rate and still have a high death rate.
R: The developing countries show the most rapid growth rate.
S: Some others like the European nations, have a low birth rate and a low death rate.
S6: Compared to this in Europe the growth rate is low.

The Proper sequence should be:
In crystallographic notations, the vector $$\overrightarrow {{\bf{OP}}} $$  in the cubic cell shown in the figure is
Solid State Physics mcq question image
The temperature dependence of the electrical conductivity σ of two intrinsic semiconductors A and B is shown in the figure. If EA and EB are the band gaps of A and B respectively, which one of the following is true?
Solid State Physics mcq question image
Variation of electrical resistivity $$\rho $$ with temperature T of three solids is sketched (on different scales) in the figure, as curves P, Q and R.
Which one of the following statements describes the variations most appropriately?
Solid State Physics mcq question image
The dependences of the magnetic susceptibility $$\left( \chi \right)$$ of a material with temperature (T) can be represented by $$\chi \propto \frac{1}{{T - \theta }},$$   where θ is the Curie-Weiss temperature. The plot of magnetic susceptibility versus temperature is sketched in the figure, as curves P, Q and R with curve Q having θ = 0. Which one of the following statements is correct?
Solid State Physics mcq question image