Bissoy.com
Doctors Medicines MCQs Q&A

What is the current flowing through a resistor of 24 ohms if a capacitor of 10 microfarads is placed in parallel to the resistor and 4V DC voltage supply is placed in series with the resistor?

What is the current flowing through a resistor of 24 ohms if a capacitor of 10 microfarads is placed in parallel to the resistor and 4V DC voltage supply is placed in series with the resistor? Correct Answer 6Ampere

6ampere current flowing through a resistor of 24ohm if the voltage drop across a resistor is 4 volts. The capacitor will act as open circuit and no current will pass through it as DC voltage is applied. And since we know from the ohm’s law we know that V=IR where V is the voltage drop across the resistor, I is the current flowing through it and R is the resistance value of it, therefore I=V/R, which gives I=>24/4=6ampere.

Related Questions

What is the current flowing through a resistor of 24 ohms if a capacitor of 10 microfarads is placed in series to a resistor along with 10V DC voltage supply?
What is the current flowing through a resistor of 4 ohms if a capacitor of 10 microfarads is placed in series to a resistor along with 5V DC voltage supply?
What is the source voltage applied across a loop containing a resistor of 1000 ohm and capacitor of 15 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 5 Volts?
What is the source voltage applied across a loop containing a resistor of 100 ohm and capacitor of 15 microfarads in series when a current of 0.05 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts?
What is the source voltage applied across a loop containing a resistor of 500 ohm and capacitor of 10 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts.
In a clapp oscillator with three capacitor C1, C2, C3, C1 is used as upper capacitor in voltage divider, C2 is used as lower capacitor in voltage divider and C3 is the third capacitor. For perfect operation which of these capacitor should have minimum value?
The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)
I1 is the current flowing in the first mesh. I2 is the current flowing in the second mesh and I3 is the current flowing in the top mesh. If all three currents are flowing in the clockwise direction, find the value of I1, I2 and I3.
Determine the resistance (in Ohms) of resistor when the potential difference between the ends of the resistor is 24 V and the current flowing through the resistor is 3 A.
Consider a capacitor and resistor connected in series to a sinusoidal voltage source. The voltage across the capacitor lags the voltage across the resistor by an angle θ degrees. What is the value of θ?