Bissoy.com
Doctors Medicines MCQs Q&A

Which type of gear is used to convert rotary into translatory motion?

Which type of gear is used to convert rotary into translatory motion? Correct Answer Rack and pinion

Rack and pinion type of gear is used to convert rotary motion into translatory motion. In spur gears teethes are parallel to the axis and used for transmitting power between two parallel shafts. In helical gears teethes are inclined with the axis.

Related Questions

A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
If one gear is fixed while the other gear has motion of two types i.e. rotary about its own axis and rotation about axis of fixed gear, than the gear train is _____
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
Consider the following types of motion.  A. Periodic Motion B. Straight Line Motion C. Rotational Motion D. Circular Motion The motion of a pendulum can be categorised in which of the following types of motion?
The gear used to convert rotary motion into translating motion is
Which of the following option is true about rotary tables? Statement 1: Index is not used with optical rotary table. Statement 2: Accurate worm and gear rotary table can be used with an index plate.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the tangential gear tooth force. Module of the gear is 5mm.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.