If the output power of an amplifier is 10 V, and the input power supplied to the amplifier is 0.229 V given that the DC voltage used is 38.5 V, efficiency of the power amplifier is:

In the question one statement is given, followed by two conclusions, I and II. You have to consider the statement to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statement. Statement: A function is a relation between a set of input elements and a set of possible output elements where each input is related to exactly one output. Conclusion I: Every input element is related to every output element. Conclusion II: Every input element is related to one element of the output.

A

Only conclusion I follows

B

Only conclusion II follows

C

Neither I nor II follows

D

Both I and II follows

A system provides output yi(t) when xi(t) is applied. If the system is said to be LTI then which of the following properties must satisfy? (i).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) + by2(t) (ii).If the input is x(t – T), then the output must be y (t – T) (iii).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) * by2(t) (iv).If the input is x(t – T), then the output must be y(t + T)

A

(i), (ii) and (iv)

B

(i), (ii) and (iii)

C

(ii), (iii) and (iv)

D

(i) and (ii)

Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market

A

1 and 5

B

5 and 7

C

6 and 7

D

4 and 6

A sinusoidal input voltage V_in of frequency ω is fed to the circuit shown in the figure, where C₁ ≫ C₂. If V_m is the peak value of the input voltage, then output voltage (V_out) is
Electronics mcq question image

A

$$2{V_m}$$

B

$$2{V_o}\sin \omega t$$

C

$$\sqrt 2 {V_m}$$

D

$$\frac{{{V_m}}}{2}\sin \omega t$$

If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.

A

True

B

False

Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.

A

1, 2 and 4 only

B

1, 3 and 4 only

C

2, 3 and 4 only

D

1, 2 and 3 only

Which of the following statements is/are correct? 1. A system is said to be Finite Impulse Response (FIR), if the output samples of the system depend only on the present input and a finite number of past or previous input samples. 2. If the output of a system y(n) depends only on the present input and past inputs, but not on past outputs, then it is called a non-recursive system. 3. If the output of a system y(n) depends only on the present input and past inputs, but not on past outputs, then it is called a recursive system.

A

1 only

B

1 and 2 only

C

1 and 3 only

D

3 only

Consider an inverting amplifier with a nominal gain of 1000 constructed from an op amp with an input offset voltage of 3 mV and with output saturation levels of ±10 V. If the effect of VOs(input offset voltage) is nulled at room temperature (250C), how large an input can one now apply if the circuit is to operate at a constant temperature?

A

8.5 mV

B

9 mV

C

9.5 mV

D

10 mV

Consider a voltage series feedback network, where amplifier gain = 100, feedback factor = 5. For the basic amplifier, input voltage = 4V, input current=2mA. Find the input resistance of the network.

A

1.002kΩ

B

1002kΩ

C

2kΩ

D

2000kΩ

An amplifier without feedback has a voltage gain of 50, input resistance of 1 kΩ & Output resistance of 2.5 kΩ.The input resistance of the current shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is

A

$$\frac{1}{{11}}{\text{k}}\Omega $$

B

$$\frac{1}{5}{\text{k}}\Omega $$

C

5 kΩ

D

11 kΩ

If the output power of an amplifier is 10 V, and the input power supplied to the amplifier is 0.229 V given that the DC voltage used is 38.5 V, efficiency of the power amplifier is:

Related Questions