Bissoy.com
Doctors Medicines MCQs Q&A

___________ amplifiers are linear circuits, where the transistor is biased to conduct over the entire range of the input signal cycle.

___________ amplifiers are linear circuits, where the transistor is biased to conduct over the entire range of the input signal cycle. Correct Answer Class A amplifiers

Class A amplifiers are linear circuits, where the transistor is biased to conduct over the entire range of the input signal cycle. Because of this, class A amplifiers theoretically have a maximum efficiency of 50%.

Related Questions

A transistor is used in common emitter mode as an amplifier. Then a. The base-emitter junction is forward biased b. The base-emitter junction is reverse biased  c. The input signal is connected in series with the voltage applied to the base-emitter junction  d. The input signal is connected in series with the voltage applied to bias the base-collector junction Which of the following statement is true?
In order to increase the bandwidth of tuned amplifiers, one can use: 1. Tuned circuit with inductance having high Q factor 2. Double tuned amplifier with two tuned circuits coupled by mutual inductance 3. Staggered tuned amplifiers in which different tuned circuits which are cascaded are tuned to slightly different frequencies
For transistor action (a) Base, emitter, and collector regions should have similar size and doping concentrations. (b) The base region must be very thin and lightly doped. (c) The emitter-base junction is forward biased and the base-collector junction is reverse biased. (d) Both the emitter-base junction as well as the base-collector junction are forward biased. Which one of the following pairs of statements is correct?
You are given two amplifiers, A and B, to connect in cascade between a 10-mV, 100-kΩ source (S) and a 100-Ω load (L). The amplifiers have voltage gain, input resistance, and output resistance as follows: for A, 100 V/V, 10 kΩ, 10 kΩ, respectively; for B, 1 V/V, 100 kΩ, 100 Ω, respectively. Your problem is to decide how the amplifiers should be connected so that the voltage gain is maximum.
Consider a system whose input r and output y are related by the equation $$y\left( t \right) = \int\limits_{ - \infty }^\infty {x\left( {t - \tau } \right)} h\left( {2\tau } \right)d\tau $$
Signal Processing mcq question image
Where h(t) is shown in the graph
Which of the following four properties are possessed by the system? BIBO: Bounded input gives a bounded output
Causal: The system is causal.
LP : The system is low pass.
LTI: The system is linear and time-invariant.
In NPN transistor, when emitter junction is forward biased and collector junction is reverse biased, the transistor will operate in
Simplify : $${{{5 \over 3} \times {7 \over {51}}{\text{ of }}{{17} \over 5} - {1 \over 3}} \over {{2 \over 9} \times {5 \over 7}{\text{ of }}{{28} \over 5} - {2 \over 3}}}$$
A class B amplifier consists of _______ transistors in order to conduct the input signal over the entire cycle.
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
Chopper stabilized dc amplifiers are complex amplifiers having ________ amplifiers incorporated in the module.