Bissoy.com
Doctors Medicines MCQs Q&A

The dominant mode in the cylindrical cavity resonator is TE101 mode.

The dominant mode in the cylindrical cavity resonator is TE101 mode. Correct Answer false

The dominant mode of propagation in a circular waveguide is TE111 mode. Hence, the dominant mode of resonance in a cylindrical cavity made of a circular waveguide is TE111 mode. In a cylindrical resonator, the mode of propagation depends on the length of the cavity.

Related Questions

Given that the wave number of a circular cavity resonator is 151 (TE011 mode), and the length of the cavity is twice the radius of the cavity, the radius of the circular cavity operating at 5GHz frequency is:
The required length of the cavity resonator for l=1 mode (m=1, n=0) given that the wave number of the cavity resonator is 157.01 and the broader dimension of the waveguide is 4.755 cm:
Parth had the cylindrical iron piece. He drilled out a conical cavity from the iron piece. The height and radius of the conical cavity is 15 cm and 8 cm respectively which is equal to the eight and radius of cylindrical iron piece. Find the total surface area of the remaining cylindrical iron piece.
You know that H is dominant for height locus and H is recessive. Is the F2 progeny are a mixture of 3:1 dominant: recessive and you pick a dominant plant at random what will be the probability that the F3 will have a mixture of dominant and recessive traits as well?
The propagation constant of TEmn mode of propagation for a cylindrical cavity resonator is:
A circular cavity resonator has a wave number of 151, radius of 2.74 cm, and surface resistance of 0.0184Ω. If the cavity is filled with a dielectric of 2.01, then unloaded Q due to conductor loss is:
A sphere of diameter 42 cm is melted and bullets are formed from it. The bullet has circular cylindrical shape from one side and conical from other side. The radius of the base of the cylindrical part of the bullet is 6 cm and the cylindrical part has thrice as much length as the conical part. Find how many such bullets can be formed if the curved surface area of the cylindrical part of a bullet is 79.2 cm2.
A cylindrical cavity resonator can be constructed using a circular waveguide.
In a solid cubical wooden piece, a cavity is made in the shape of an inverted square pyramid, such that the depth of the cavity is 2 times the base edge of the square pyramid. If the lengths of the base edge of the pyramid and the edge of the cubical piece are in the ratio 2 ∶ 5, then the volume of the cavity is what percentage of the volume of the cubical piece.
The following question consists of six sentences of a passage. The first and the sixth sentences are given in the beginning as S1 and S6. The middle four sentences in each have been jumbled up and labelled P, Q, R and S. You are required to find the proper sequence of the four sentences and mark your response accordingly. S1: A single device can heat fluids without requiring an electrical element. S6: Because there is no electrical element, there is no risk of fire, so the system is suitable for dangerous environments. P: A heat exchanger transfers heat from the central cavity to an air heater, a water heater or an industrial processor. Q: It has a container like the crankcase of a car’s engine, which contains the fluid to be heated. R: Compression and friction at the nozzles heat the fluid so that the temperature in the central -cavity rises steadily. S: A motor and pulley inside the container turn a rotor wheel, which in turn forces the fluid again and again through narrow nozzles into a central cavity. The proper sequence should be