To get an admittance chart from an impedance chart:

To get an admittance chart from an impedance chart: Correct Answer Smith chart has to be rotated by 180⁰

Impedance and admittance parameters, both are a reciprocal of one another. Hence one chart can be obtained from the other chart. By rotating the impedance smith chart by an angle of 180⁰, admittance chart is obtained.
Bissoy MCQ

Related Questions

Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
After conjugate impedance matching the input impedance used for matching after normalization was 1+j with the characteristic impedance of the transmission line being 100Ω, then the generator impedance must have been:
The characteristic impedance of a transmission line with impedance and admittance of 16 and 9 respectively is
For a load impedance of ZL=60-j80. Design of 2 single-stub shunt tuning networks to match this load to a 50Ω line is to be done. What is the normalized admittance obtained so as to plot it on smith chart?
If source impedance is complex, then maximum power transfer occurs when the load impedance is _______ the source impedance.
The characteristic impedance of the transmission line if the outer diameter and inner diameter of the transmission line is 20 mm and 10 mm respectively, given the intrinsic impedance of the medium is 377 Ω, then the characteristic impedance of the transmission line is:
Expression for input impedance of a transmission line in terms of load impedance and characteristic impedance is:
If a transmission line of a characteristic impedance 100 Ω is terminated with a load impedance of 300+j200 Ω, then the normalized load impedance is:
If the normalized load impedance of a transmission line is 0.3-j0.4 with a characteristic impedance of 50 Ω, then the load impedance is:
If the power delivered to a load is 0.04w, then the normalized generator impedance if the source use is 4V at 2GHz and the generator impedance is real and characteristic impedance of the transmission line is 50Ω is: