Bissoy.com
Doctors Medicines MCQs Q&A

A unity feedback system with open-loop transfer function G (s) = 4/ is critically damped. The value of the parameter p is

A unity feedback system with open-loop transfer function G (s) = 4/ is critically damped. The value of the parameter p is Correct Answer is critically damped. The value of the parameter p is ] 4

The value of the p can be calculated by comparing the equation with the standard characteristic equation.

Related Questions

Match the following:   Curve   Nature of damping I Curve (a) A Un - Damped II Curve (b) B Over Damped III Curve (c) C Under Damped IV Curve (d) D Critically Damped
As unity feedback system has a forward path transfer function G(s) = K/s(s+8) where K is the gain of the system. The value of K, for making this system critically damped should be
Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
A single-input single-output feedback system has forward transfer function G(s) and feedback transfer function H(s). It is given that |G(s)H(s)| < 1. Which of the following is true about the stability of the system?
The block diagram of a feedback compensated system is given below: Which of the following statements are correct? a) When Kt = 0, the feedback compensation is in-effective and the system is uncompensated b) When Kt = 0, the feedback compensation is most effective and system is compensated c) The performance of the compensated system depends on Kt and T d) The performance of the compensated system does not depend on T
Which one of the following transfer functions represents the critically damped system?
A unity feedback control system is characterized by the open-loop transfer function \(G\left( s \right) = \frac{{10K\left( {s + 2} \right)}}{{{s^3} + 3{s^2} + 10}}\) The Nyquist path and the corresponding Nyquist plot of G(s) are shown in the figures below. If 0 < K < 1, then the number of poles of the closed-loop transfer function that lie in the right-half of the s-plane is
The closed loop transfer function of a unity negative feedback system is 100/(s2+8s+100). Its open loop transfer function is: