Bissoy.com
Doctors Medicines MCQs Q&A

Rise time, Peak time, maximum peak overshoot, settling time, and steady state error are mutually dependent.

Rise time, Peak time, maximum peak overshoot, settling time, and steady state error are mutually dependent. Correct Answer True

Rise time, peak time, settling time and maximum peak overshoot are the prime factors of the time domain analysis and they must be specified in a consistent manner but they are mutually dependent.

Related Questions

Assertion (A): All the systems which exhibit overshoot in transient response will also exhibit resonance peak in frequency response. Reason (R): Large resonance peak in frequency response corresponds to a large overshoot in transient response.
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise -fall periods and rise and fall periods should be same. The maximum rise in follower is 30 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 45 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 55 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within first half of cam profile, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 35 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
Consider the following statements: 1. Integral controller improves steady state response 2. By use of proportional controller, maximum peak overshoot decreases 3. Type and order of system reduces by one for derivative controller 4. Integral controller makes the system less stable in transient state due to oscillations Select the correct answer using the codes given below:
Consider the relational schema given below, where eId of the relation dependent is a foreign key referring to empId of the relation employee. Assume that every employee has at least one associated dependent in the dependent relation. Employee (empId, empName, empAge) Dependent(depId, eId, depName, depAge) Consider the following relational algebra query: ΠempId(employee)-ΠempId (employee⋈(empId = eID)∧(empAge ≤ depAge)dependent) The above query evaluates to the set of empIds of employees whose age is greater than that of
Consider the following statements: 1. The delay time is the time required to reach 50% of the final value in the first time. 2. The rise time is the time required for the response to rise from 10% to 90% of its final value for underdamped systems. 3. The rise time is the time required for the response to rise from 0 to 100% for the underdamped systems. Which of these statements are correct?
Which of the following quantities give a measure of the transient characteristics of a control system, when subjected to unit step excitation. 1. Maximum overshoot 2. Maximum undershoot 3. Overall gain 4. Delay time 5. Rise time 6. Fall time