Bissoy.com
Doctors Medicines MCQs Q&A

Asynchronous counters are generally used in circuits with higher frequency, where a large number of bits are involved.

Asynchronous counters are generally used in circuits with higher frequency, where a large number of bits are involved. Correct Answer False

In asynchronous counters, there are small delays between the arrival of the clock pulse at the input due to the internal circuit of the gate so, if the delay of the all the stages are added together the total delay at the end of the counter can be very large. Therefore, asynchronous counters are not used in high-frequency circuits where large numbers of bits are involved.

Related Questions

Which of the following statements regarding binary counters are correct? (a) Clock inputs of all the flip - flops of a synchronous counter are applied from the same source whereas those in an asynchronous counter are from different sources. (b) The asynchronous counter has ripple effects whereas the synchronous counter does not. (c) Only J-K flip-flops can be used in synchronous counters whereas asynchronous counters can be designed with any kind of flip flops. (d) Latches can be used for designing asynchronous counters. Code :
Directions : In each of the following questions a statement is given, followed by three conclusions. Give answer : Statement : The Government of India has set up one-stop facilitation counters manned by trained staff for attending to various needs of the foreign tourists at all the international airports. Assumptions : I. There is adequate trained staff available to man these counters in shifts. II. The services provided by these counters will help boosting inflow of foreign tourists. III. Majority of the foreign tourists need variety of services when they reach India.
Directions : In each of the following questions a statement is given, followed by three conclusions. Give answer :

Statement : The Government of India has set up one-stop facilitation counters manned by trained staff for attending to various needs of the foreign tourists at all the international airports.

Assumptions :
I. There is adequate trained staff available to man these counters in shifts.
II. The services provided by these counters will help boosting inflow of foreign tourists.
III. Majority of the foreign tourists need variety of services when they reach India.
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
Some students were not involved in the strike. If the above statement is true, which of the following conclusions is/are logically necessary? 1. Some who were involved in the strike were students. 2. No student was involved in the strike. 3. At least one student was involved in the strike. 4. Some who were not involved in the strike were students.
Assume that a 12-bit Hamming codeword consisting of 8-bit data and 4 check bits is d8d7d6d5c8d4d3d2c4d1c2c1, where the data bits and the check bits are given in the following tables: Data bits d8 d7 d6 d5 d4 d3 d2 d1 1 1 0 x 0 1 0 1   c8 c4 c2 c1 Y 0 1 0 Which one of the following choices gives the correct values of x and y?
Which statement(s) about IPv4 and IPv6 addresses are true?1. An IPv6 address is 32 bits long, represented in hexidecimal.2. An IPv6 address is 128 bits long, represented in decimal.3. An IPv4 address is 32 bits long, represented in decimal.4. An IPv6 address is 128 bits long, represented in hexidecimal.
The accompanying image shows a large cube made of dark and white small sugar cubes. Small cubes of the diagonally arranged row of the bottom surface of the large cube, small cubes of the row with one face on the right-hand surface of the large cube, small cubes of the row with one face on the front surface of the large cube, and small cubes of the column with one face on the top of large cube surface are all dark. Select the number of small white cubes of the large cube.
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   A ROM is to be used to implement a “Squarer”, which outputs the square of a 3-bit number. What must be the size of the ROM?
The circuits of NOR based S-R latch classified as asynchronous sequential circuits, why?