Bissoy.com
Doctors Medicines MCQs Q&A

The ideal reconstruction filter is an ideal low pass filter and its impulse response extends for all time.

The ideal reconstruction filter is an ideal low pass filter and its impulse response extends for all time. Correct Answer True

The ideal reconstruction filter is an ideal low pass filter and its impulse response extends for all time. Hence the filter is noncausal and physically nonrealizable. Although the interpolation filter with impulse response given can be approximated closely with some delay, the resulting function is still impractical for most applications where D/A conversion are required.

Related Questions

Consider a circuit as shown in figure The circuit is (1) Constant K low-pass filter (2) Constant K high-pass filter (3) The m-derived low-pass filter (4) The m-derived high-pass filter
If hlp(n) denotes the impulse response of a low pass filter with frequency response Hlp(ω), then what is the frequency response of the high pass filter in terms of Hlp(ω)?
Which of the following statements about the matched filter in a communication receiver are correct ? (A) It may produce phase error if synchronization is improper (B) Its impulse response depends on the singal shape (C) The characteristics of the matched filter is matched with the transmitted data (D) It produces inter symbol interference (E) It measures the correlation between incoming received message and its impulse response Choose the correct answer from the options given below : 
If the low pass filter described by the difference equation y(n)=0.9y(n-1)+0.1x(n) is converted into a high pass filter, then what is the frequency response of the high pass filter?
In MATLAB, the impulse response of the step response of a system is ___ to the step response of the impulse response of the system.
The low pass, high pass, band pass and band stop filters can be designed by applying a specific transformation to a normalized low pass filter.
If H(s) is the transfer function of a analog low pass normalized filter and Ωu is the desired pass band edge frequency of new low pass filter, then which of the following transformation has to be performed?
The low-pass active filter shown in the figure has a cut-off frequency of 2 kHz and a pass band gain of 1.5. The values of the resistors are
Electronics mcq question image
A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t). The resulting signal is passed through an ideal low pass filter with bandwidth 1 kHz. The output of the low pass filter would be :