In amplitude modulated system, total sideband power is ________ than the carrier power.

In amplitude modulated system, total sideband power is ________ than the carrier power. Correct Answer always more

If we take the total power, then it is the sum of the carrier power and power of all the sidebands produced in the modulated signal. Thus, the total power is always more than the carrier power.
Bissoy MCQ

Related Questions

A 2 MHz carrier is amplitude modulated by a 500 Hz modulating signal to a depth of 70%. If the unmodulated carrier power is 2 kW, the power of the modulated signal is
Calculate power in each sideband, if power of carrier wave is 176W and there is 60% modulation in amplitude modulated signal?
Calculate power in each sideband, if power of carrier wave is 96W and there is 40% modulation in amplitude modulated signal?
A single sideband modulation system is more efficient than a plain amplitude modulated system.
A GSM cellular telephone standard requires a minimum of 9 dB rejection of interfering signal levels of -23 dBm at 3 MHz from the carrier, -33 dBm at 1.6 MHz from the carrier, and -43 dBm at 0.6 MHz from the carrier, for a carrier level of -99 dBm. Determine the required local oscillator phase noise at 3 MHz carrier frequency offset.
In SSB modulation, only a single sideband is transmitted leaving the other sideband and the carrier.
Signal to noise ratio of a frequency modulated system is better than amplitude modulated system.
A 50 kW carrier is to be amplitude modulated to a level of 85%. What is the carrier power after modulation?
Maximum Amplitude of an amplitude modulated 10V and minimum amplitude is 5V. Find its modulation index?
A 400W carrier wave is modulated to a depth of 65%. Find the total power of modulated wave?