Bissoy.com
Doctors Medicines MCQs Q&A

Find the carrier frequency if the inductance and capacitance are 30μH and 10nF respectively?

Find the carrier frequency if the inductance and capacitance are 30μH and 10nF respectively? Correct Answer 290KHZ

Carrier frequency is a waveform (usually sinusoidal) that is modulated (modified) with an input signal for the purpose of conveying information.

Related Questions

What will be the oscillator frequency of Hartley oscillator if inductance L1, L2 are equal to 1mH and 2mH respectively and capacitor C is 10nF. (Neglect mutual inductance)
A GSM cellular telephone standard requires a minimum of 9 dB rejection of interfering signal levels of -23 dBm at 3 MHz from the carrier, -33 dBm at 1.6 MHz from the carrier, and -43 dBm at 0.6 MHz from the carrier, for a carrier level of -99 dBm. Determine the required local oscillator phase noise at 3 MHz carrier frequency offset.
In an AM system receiver. the mixer translates the carrier frequency fc to a fixed intermediate frequency of 450 kHz. Given a broadcast signal of frequency 900 kHz. What is the corresponding image frequency when a superhetrodyne receiver is employed with local oscillator frequency greater than the broadcast signal frequency?
Which of the following statements are true? a. In overhead lines, inductance is more predominant whereas capacitance is in the cable. b. In overhead lines, capacitance is more predominant whereas inductance is in the cable. c. Cost of cable is high compared to the overhead lines. d. Cost of cable is low compared to overhead lines
Two capacitors having capacitance value 4F, three capacitors having capacitance value 2F and 5 capacitors having capacitance value 1F are connected in parallel, calculate the equivalent capacitance.
Consider the following components in a multi-stage R-C coupled amplifier: 1. Parasitic capacitance of transistor 2. Coupling capacitance 3. Stray capacitance 4. Wiring capacitance Which of the above components effectively control high frequencies?
If L1 and L2 are the inductance used in the Hartley oscillator, the effective inductance in the equation of frequency calculation is equal to (Without considering mutual inductance).
An audio signal (say from 50 Hz to 10000 Hz) is frequency translated by a carrier having a frequency of 106 Hz. The values of initial (without frequency translation) and final (after frequency translation) fractional change in frequency from one band edge to the other are
The equivalent circuit of a quartz crystal has LCR arm capacitance of 12nF and inductance of 3mH and parallel arm capacitance of 4nF. Parallel resonant frequency for the circuit is:
Which of the following is/are correct? 1. Detection is the process of recovering the modulating signal from the modulated carrier wave. 2. The carrier frequency is usually changed to a lower frequency by what is called an intermediate frequency (IF) stage preceding the detection.