Bissoy.com
Doctors Medicines MCQs Q&A

In the screw collinear forces act, what is a collinear system of forces?

In the screw collinear forces act, what is a collinear system of forces? Correct Answer The force system having all the forces emerging from a single point

The force system having all the forces emerging from a point is called the collinear system of force. This is a type of system of the force, which is easy in the simplification. This is because as the forces are the vector quantity, the vector math is applied and the simplification is done.

Related Questions

A multiple-threaded screw is designed in such a way for one complete rotation of screw advances to a distance of 5 times the pitch of the screw. If need to make the lead only up to 3 times of the pitch of screw then how many angles should we rotate the screw?
A multiple-threaded screw has a pitch of screw 4mm and if the screw is made to 5 revolutions the screw will advances to 40 mm. What type of screw is it?
A flange of radius 200mm is fastened to the machine screw by means of four cap screws of pitch circle radius 150mm. The external force P is 20kN which is loaded at 160mm from the machine screw. There are two dowel pins to take shear load. Determine the core diameter of cap screw if permissible tensile stress in cap screw is 40N/mm².
In a simple screw jack, the pitch of the screw is 9 mm and length of the handle operating the screw is 45 cm. The velocity ratio of the system is
Just like the collinear forces, there are collinear couple and the net moment is taken out from it.
Just like the collinear forces for free body diagrams there are collinear couple and the net moment is taken out from it.
The system of forces acting on the aircraft are propulsive forces, aerodynamic forces, gravitational forces and these result in inertial forces.
While designing a screw in a screw jack against buckling failure, the end conditions for the screw are taken as
A screw without the turnings can be approximated to be a combination of two cylinders. If the material used to make the screw weighs 4g per cm3, what is the weight of the screw given in the figure?
Two statements are given, followed by three conclusions numbered I, II and III. Assuming the statements to be true, even if they seem to be at variance with commonly known facts, decide which of the conclusions logically follow(s) from the statements. Statements: All equipments are screw-drivers. All machines are equipments. Conclusions: I. Some screw-drivers are equipments. II. Some screw-drivers are machines. III. All equipments are machines.