Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

The solutions to many problems involving electric fields are simplified by making use of equipotential surfaces. An equipotential surface is a surface: 1. On which the potential is the same everywhere 2. The movement of charge over such a surface would require no work 3. The tangential electric field is zero 4. The normal electric field is zero Which of the above statements are correct?
Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Reason (R) Assertion (A): In Gunn effect, when electric field is varied from zero to a threshold value the drift velocity decreases. Reason (R): Beyond the threshold electric field, if the electric field is increased, the drift velocity is decreased and the diode exhibits negative resistance. In the light of the above statement, choose the most appropriate answer from the options given below:
When an electric current coil of a wattmeter is connected to the electric current path R and the voltage coil is connected between the electric current R path and the neutral side of the balanced three phase supply, it shows 10 kW. The line voltage along the phase sequence RYB is 400 V. The current drawn by the current path is 54 A. What is the new reading of the wattmeter if the voltage coil is connected between the lines B and the Y paths, even if the electric current coil is continuously present in the line R?
Which of the following is/are true about dipole? (1) The unit of electric dipole moment is coulomb meter (2) The net charge of the electric dipole is zero (3) The net electric field due to an electric dipole is nonzero. (4) Point diploe is the diploe with a small value of the charge.
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
Consider the following statements regarding n-channel JFET: 1. The maximum drain current IDSS occurs when gate-to-source voltage VGS = 0 V and drain-to-source voltage VDS ≥ |VP|. (VP is pinch-off voltage). 2. For gate-to-source voltage VGS less than the pinch-off level, the drain current is 0 A. 3. For all levels of VGS between 0 V and the pinch-off level, the current ID will range between IDSS and 0 A, respectively. which of the above statements are correct ?
Choose the right option among the alternatives – A thyristor goes into full conduction in its forward direction when anode/cathode/gate is positive with respect to its anode/cathode/gate and a turn-on voltage or current signal in the form of a pulse is given to its anode/ cathode/gate.
Consider the following statements associated with the basic electric properties of ideal conductors: 1. The resultant field inside is zero. 2. The net charge density in the interior is zero. 3. Any net charges reside on the surface. 4. The surface is always equipotential. 5. The field just outside is zero. Which of the above statements are correct?
Consider the following statements: 1. In a silicon controlled rectifier (SCR), if the cathode gate is reverse-biased, then the SCR cannot fire at all. 2. The turn-on time of an SCR increases with temperature. 3. After an SCR is turned on, it can be made to turn off again by reverse biasing the gate. 4. Gate recovery time is the minimum time that the anode voltage must be maintained below holding voltage VH to turn off the SCR. Which of these statements are correct?
In the Hall Effect, the electric field is in x direction and the velocity is in y direction. What is the direction of the magnetic field?