Bissoy.com
Doctors Medicines MCQs Q&A

What is the function of LPF in the following block diagram?

What is the function of LPF in the following block diagram? Correct Answer Suppress high frequency components of PD output and presenting DC signal to VCO

The function of LPF in PLL is to suppress high frequency components of PD output and presenting DC signal to VCO.

Related Questions

Pyroxenes are class of silicate minerals, which exhibit a polymeric chain structure, as shown below
S-Block and P-Block Elements mcq question image
Its simplest repeating unit is
In which of the following block would you find the Rare Earth Elements? s-block p-block d-block f-block
A spring mass system is on a horizontal plane. Spring constant is 2N/m & mass of block is 2kg. The spring is compressed by 10cm and released. A small ball is released from a height of 2m above the block on the horizontal plane. At what time should the ball be left if the block is released from the extreme position at t=0, given that the ball has to fall on the block when the speed of block is maximum?
A spring block system is on a horizontal surface. The block is compressed by 10cm. What should be the coefficient of friction between the block and ground such that the block comes to a stop at the mean position? Mass of block = 0.5kg & spring constant = 3N/m.
Match the columns: I  II a. s block i. Sm b. p block ii. S c. d block iii. Sb d. f block iv. Sg   v. Sc   vi. Sr
A block of mass M, supporting another block of mass m, is moved horizontally with an increasing acceleration from zero. If μ is the coefficient of static friction between the blocks, the acceleration  at which the upper block slips on the lower block is
A block R of mass 100 kg is placed on a block S of mass 150 kg as shown in the figure. Block R is tied to the wall by a massless and inextensible string PQ. If the coefficient of static friction for all surfaces is 0.4, the minimum force F (in kN) needed to move the block S is
A copper block and an air mass block having similar dimensions are subjected to symmetrical heat transfer from one face of each block. The other face of the block will be reaching the same temperature at a rate is?
A weston differential pulley block consists of a lower block and upper block. The upper block has two cogged grooves, one of which has a radius of 150 mm and the other a radius of 125 mm. If the efficiency of the machine is 50% calculate the effort required to raise a load of 1.5 kN.
A wooden block is kept on a polished wooden plank and the inclination of the plank is gradually increased. It is found that the block starts slipping when the plank makes an angle of 18° with the horizontal. However, once started the block can continue with uniform speed if the inclination is reduced to 15°. Find the coefficient of static friction between the block and the plank.