Bissoy.com
Doctors Medicines MCQs Q&A

Consider a practical op-amp where the power supply is VCC = +12V and VEE = -12V. The open loop gain is 106 and open loop bandwidth is 5Hz. What is the maximum positive input before which the output is saturated?

Consider a practical op-amp where the power supply is VCC = +12V and VEE = -12V. The open loop gain is 106 and open loop bandwidth is 5Hz. What is the maximum positive input before which the output is saturated? Correct Answer 0.012 mV

The output is saturated at the input +VSat/AOL or –VSat/AOL. For positive saturation, the maximum allowable input is 12/106 = 0.012 mV.

Related Questions

Consider the statement below. A person who is radical (R) is electable (E) if he/she is conservative (C), but otherwise is not electable. Few probable logical assertions of the above sentence are given below. (A) \(\left( {R \wedge E} \right) \Longleftrightarrow C\) (B) \(R\; \Rightarrow \left( {E \Leftrightarrow C} \right)\) (C) \(R \Rightarrow \left( {\left( {C \Rightarrow E} \right)V\;\neg \;E} \right)\) (D) \(\left( {\neg \;R \vee \neg \;E \vee C} \right) \wedge \left( {\neg \;R \vee \neg \;C \vee E} \right)\;\;\) Which of the above logical assertions are true? Choose the correct answer from the options given below:
An internally compensated op amp has a dc open-loop gain of 106 V/V and an AC open-loop gain of 40 dB at 10 kHz. Estimate its gain–bandwidth product and its expected gain at 1 kHz.
An internally compensated op amp is specified to have an open-loop dc gain of 106 dB and a unity gain bandwidth of 3 MHz. Find fb and the open-loop gain at fb.
Specification of op-amp 741c is given below: A=200000; Ri=2MΩ; Ro=75Ω; Supply voltages= ±15v; output voltage swing =±13v; fo=5hz. Compute the value of output resistance, bandwidth and closed loop voltage gain for the circuit shown.
A certain inverting amplifier has a closed-loop voltage gain of 25. The OP-amp has an open-loop voltage gain of 100,000. If an OP-amp with an open-loop voltage gain of 200,000 is substituted in the arrangement, the closed-loop gain
In designing with op amps one has to check the limitations on the voltage and frequency ranges of operation of the closed-loop amplifier, imposed by the op-amp finite bandwidth (ft), slew rate (SR), and output saturation (Vo max). Consider the use of an op amp with ftt = 2 MHz, SR = 1 V/µs, and V0 max = 10 V in the design of a non-inverting amplifier with a nominal gain of 10. Assume a sine-wave input with peak amplitude Vi. If Vi = 0.5 V, what is the maximum frequency before the output distorts?
In designing with op amps one has to check the limitations on the voltage and frequency ranges of operation of the closed-loop amplifier, imposed by the op-amp finite bandwidth (ft), slew rate (SR), and output saturation (Vo max). Consider the use of an op amp with ftt = 2 MHz, SR = 1 V/µs, and V0 max = 10 V in the design of a non-inverting amplifier with a nominal gain of 10. Assume a sine-wave input with peak amplitude Vi. If f = 20 kHz, what is the maximum value of Vi before the output distorts?
Calculate the unity gain bandwidth of an op-amp. Given, A≅ 0.2×106 & fo =5Hz?
A practical op-amp has a bandwidth of only 10 Hz. Gain is 106, and the required bandwidth is 100 kHz. How much feedback is required?
Workability of concrete can be measured using slump, compaction factor and Vee-bee time. Consider the following statements for workability of concrete: (i) As the slump increases, the Vee-bee time increases. (ii) As the slump increases, the compaction factor increases. Which of the following is TRUE?