Bissoy.com
Doctors Medicines MCQs Q&A

When an N-channel JFET reaches pinch-off, the increase in the drain to source voltage results in shifting of the pinch-off position towards the ___________

When an N-channel JFET reaches pinch-off, the increase in the drain to source voltage results in shifting of the pinch-off position towards the ___________ Correct Answer Source

Pinch off is said to be reached if the drain to source voltage is equal to the difference between the gate to source and the threshold voltage. So, this pinch off happens at a certain distance from the source and the gradual decrease in the channel length will happen faster if the voltage along the channel length increases faster. It can be readily observed that equality is reached at a distance less than the previous case and hence the pinch-off is shifted towards the source.

Related Questions

Consider the following statements regarding n-channel JFET: 1. The maximum drain current IDSS occurs when gate-to-source voltage VGS = 0 V and drain-to-source voltage VDS ≥ |VP|. (VP is pinch-off voltage). 2. For gate-to-source voltage VGS less than the pinch-off level, the drain current is 0 A. 3. For all levels of VGS between 0 V and the pinch-off level, the current ID will range between IDSS and 0 A, respectively. which of the above statements are correct ?
Consider the following statements regarding JFET: 1. The relationship between the drain current and gate-to-source voltage of a JFET is a nonlinear. 2. The minimum current for JFET occurs at pinch-off voltage defined by VGS = VP. 3. A current controlled device is one in which a current defines the operating conditions of the device. Which of the above statements are correct?
When drain voltage equals the pinch-off-voltage, then drain current ___________ with the increase in drain voltage
Availability of drinking water is continuously decreasing. The government decided to identify those sources of drinking water which getting polluted. The following table depicts the number of polluted sources in a district. Source of drinking water getting polluted Number Wells 24 Handpump 12 Dam 12 Borewell 6 Ponds 18 The pictograph table for the above table will be (A) Source of drinking water getting polluted Number symbol = 6 source Wells Handpump Dam Borewell Ponds (B) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds (C) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds (D) Source of drinking water getting polluted Number symbol  = 6 source Wells Handpump Dam Borewell Ponds
When VDS is the drain voltage and VDS(max) is the maximum drain voltage, the JFET will breakdown if:
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
Gaurav cycles towards South-West for a distance of 6 m and stops there. Further, he moves towards East a distance of 10 m and from there he moves towards North-East a distance of 6 m. Next, he moves towards West a distance of 6 m. Now, he moves towards North-West a distance of 2 m. Next, he moves towards West a distance of 4 m and then towards South-West 6 m and stops at that point. Now, where is he from the starting point?
Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. What is the value of Vt for this transistor?
Various measurements are made on an NMOS amplifier for which the drain resistor RD is 20 kΩ. First, DC measurements show the voltage across the drain resistor, VRD, to be 2 V and the gate-to-source bias voltage to be 1.2 V. Then, ac measurements with small signals show the voltage gain to be −10 V/V. If the process transconductance parameter is 50μA/V2, what is the MOSFET’s W/L?
If a certain drain JFET has a transconductance of 4ms. And has external drain resistance of 1.5 ohm than ideal voltage gain will be _________