Bissoy.com
Doctors Medicines MCQs Q&A

Power delivered to load calculated by five-point method can be equal to __________ (Pac is power delivered to load without distortion and D is the RMS of all Harmonic distortion)

Power delivered to load calculated by five-point method can be equal to __________ (Pac is power delivered to load without distortion and D is the RMS of all Harmonic distortion) Correct Answer Pac (1+D2)

The equation of power delivered to load is same whether it is calculated by three-point or five point. The only difference is the calculation of D.

Related Questions

What is the total harmonic distortion if the amplitude of first harmonic distortion is 20dB and second harmonic distortion 25dB?
What is the total harmonic distortion if the amplitude of first harmonic distortion is 20dB, second harmonic distortion 25dB and external noise is 10dB?
A three-winding transformer is connected to an AC source with 50 V rms as shown in the following figure. Voltages induced in the secondary windings are 2 V rms and 8 V rms. The output rms voltage V0 is,
A step-down delta-star transformer, with per-phase turns ratio of 5 is fed from a 3-phase 1100 V source. The secondary of this transformer is connected through a 3-pulse type rectifier, which is feeding an R load. The power delivered to the load is 6839.3 Watts. The maximum value of the load current is √2 x 22 A. Fin, the rms value of output voltage Vo (rms)
If Vr is the rms value of the inverter output voltage and V1 is the rms value of the fundamental component, then the total harmonic distortion (THD) is given by 1/2 d) 2
Consider the following statement: 1. Initial load tests and routine load tests are carried out on test piles and working Piles, respectively. 2. In a pile load test, the allowable load can be taken equal to half the ultimate load at which the total settlement amounts to one-tenth of the pile diameter. 3. In a pile load test, the allowable load can be taken equal to two-thirds of the total toad which causes a plastic settlement of 6 mm. Which of the above statements are correct?
The ratio of the RMS amplitude of the higher order harmonic frequencies to the RMS amplitude of the fundamental frequency is commonly called __________
Power delivered to load is _________ with an increase in harmonic distortion.
Public Affairs Centre (PAC) engages in action research focussing on Sustainable Development Goals in the context of India. PAC situated in-?
A transformer has a primary voltage of 120 V rms and a secondary voltage of 25 V rms. If the secondary current is 1A rms, what is the primary current?