Bissoy.com
Doctors Medicines MCQs Q&A

What is the depth the needle in Vicat apparatus should penetrate into the cement paste in consistency test?

What is the depth the needle in Vicat apparatus should penetrate into the cement paste in consistency test? Correct Answer 33-35 mm from top of the mould

The best procedure has been clearly mentioned in IS 4031 Part 4. According to the code, 33-35mm depth of penetration is ideal.

Related Questions

In conducting a standard consistency test of Ordinary Portland cement using Vicat apparatus as per IS 4031-1988, what is the penetration depth of the needle from the top of Vicat mould, for the paste to have normal consistency?
What will be the depth of penetration of the Plunger in Vicat Apparatus (IS ∶ 5513 - 1976) from the bottom of the Vicat Mould, when the cement paste is tested for standard consistency, according to IS 4031 -1988?
Consider the following statements regarding the 'strength of cement': 1. Strength test on cement is made on cubes of the cement-sand mix. 2. Water to be used for the paste is 0.2P, where P is the water needed for normal consistency. 3. The normal consistency is determined on Le Chatelier's apparatus. 4. Cubes are cast in three layers in leak-proof moulds further compacted in each layer by vibration on a machine. Which of the above statements are correct?
Which of the following statements are correct with reference to ensuring minimum shrinkage of prestressed concrete? 1. The water-cement ratio and proportion of cement paste should be kept minimum to reduce shrinkage. 2. Aggregates of larger size, well graded for minimum void, need a smaller amount of cement paste, and attendant shrinkage will be smaller. 3. Harder and denser aggregates of low water absorptions and high modulus of elasticity will exhibit small shrinkage.
Consider the following statements : (1) Tests on cement paste to determine initial and final setting times are done at 0.85 times normal consistency conditions. (2) Low heat cement has a high percentage of tri-calcium aluminate. (3) High early strength Portland cement contains a large percentage of tricalcium silicate and lower percentage of dicalcium silicate. Which of these statements are correct ?
A shopkeeper earns a profit of 15% if he mixes 85 kg of A-type cement with 35 kg of B-type cement and sells the mixture at Rs. 46 per kg. He can increase his profit to 25% if he mixes 65 kg of A-type cement with 35 kg of B-type cement and sells the mixture at Rs. 46.5 per kg. At what price should he sell a mixture of 30 kg A-type cement and 50 kg B-type cement to earn a profit of 75%?
If t1=Time at which water is first added to cement, t2=Time when needle fails to penetrate 5 mm to 7 mm from bottom of the mould, t3=Time when the needle makes an impression but the attachment fails to do so, then what is initial setting time?
If t1=Time at which water is first added to cement, t2=Time when needle fails to penetrate 5 mm to 7 mm from bottom of the mould, t3=Time when the needle makes an impression but the attachment fails to do so, then what is final setting time?
What is the amount of water required to give the paste normal consistency for consistency test?
Match the following:  P) Norm Referenced Test 1) Measures what it claims to measure Q) Criterion Referenced Test 2) Consistency of a test R) Reliable Test 3) Practicability of a test S) Valid Test 4) Position in a predefined population   5) Performance against a fixed set of standard