Related Questions

The conversion delay in a successive approximation of an ADC 0808/0809 is
The largest analog output voltage from a 6-bit Digital to Analog Converter (DAC) which produces 1.0 V output for a digital input of 010100, is
A multiplying DAC is given a reference voltage VR = Vom cos2πft. Determine the output voltage?
If the input applied to DAC using current to voltage converter is 10110100, determine the reference voltage (Assume Io= 2mA and R1=1.2kΩ)
Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market
Statement 1: Voltage gain of -5 means that the output voltage has been attenuated. Statement 2: Voltage gain of -5db means that the output voltage has been attenuated.
If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.
An 3 phase alternator star connected 400 V synchronous motor takes a power input of 5472 watts at rated voltage. Its synchronous reactance is 10** per phase and negligible resistance. If its excitation voltage is adjusted equal to the rated voltage of 400 V, its power factor is _______
CMOS inverter is used as SPDT switch in resistor DAC and is connected to the op-amp line. Find the output of CMOS, if the input applied is 1
In the voltage/current-sourced FACTS controller, the ac input current/voltage varies in magnitude and also in any phase relationship to the system current/voltage.