Bissoy.com
Doctors Medicines MCQs Q&A

A point-to-point protocol over ethernet is a network protocol for __________

A point-to-point protocol over ethernet is a network protocol for __________ Correct Answer encapsulating PPP frames inside ethernet frames

PPoE or Point-to-Point protocol over Ethernet was first introduced in 1999. It is popularly used by modern day Internet Service Providers for Dial-up connectivity.

Related Questions

You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?
You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful?
1. TFTP server software must be running on the router.
2. TFTP server software must be running on your laptop.
3. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable.
4. The laptop must be on the same subnet as the router's Ethernet interface.
5. The copy flash tftp command must be supplied the IP address of the laptop.
Which three statements are true about the operation of a full-duplex Ethernet network?
1. There are no collisions in full-duplex mode.
2. A dedicated switch port is required for each full-duplex node.
3. Ethernet hub ports are preconfigured for full-duplex mode.
4. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
5. The host network card and the switch port must be capable of operating in full-duplex mode.
Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?
The network uses TCP/IP as the only network protocol. You configure the remote access server on the network. Some users report that when they connect to the server they receive the following message |" IPX SPX compatible computer deported error 733" The EPP control network protocol for the network is not available. If the users allow the connection to continue they are able to connect to the services that use TCP/IP. You want to prevent this message from being displayed. What should you do?
You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?
Ethernet networks can be cabled in a number of topologies, depending on what works best in each environment. As more nodes are added, the efficiency of Ethernet decreases. Select the best answer as to why Ethernet becomes less efficient as size increases.
Consider the following three statements about link state and distance vector routing protocols, for a large network with 500 network nodes and 4000 links. [S1] The computational overhead in link state protocols is higher than in distance vector protocols. [S2] A distance vector protocol (with split horizon) avoids persistent routing loops, but not a link state protocol. [S3] After a topology change, a link state protocol will converge faster than a distance vector protocol. Which one of the following is correct about S1, S2, and S3?
Simplify : $${{{5 \over 3} \times {7 \over {51}}{\text{ of }}{{17} \over 5} - {1 \over 3}} \over {{2 \over 9} \times {5 \over 7}{\text{ of }}{{28} \over 5} - {2 \over 3}}}$$
You are adding a new server to your network. The network uses TCP/IP. The new server will provide users with dial-up access to network resources. The data link communications protocol you choose for dial-up access must allow you to provide secure authentication. Which protocol should you choose?