Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful?
1. TFTP server software must be running on the router.
2. TFTP server software must be running on your laptop.
3. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable.
4. The laptop must be on the same subnet as the router's Ethernet interface.
5. The copy flash tftp command must be supplied the IP address of the laptop.
Ethernet networks can be cabled in a number of topologies, depending on what works best in each environment. As more nodes are added, the efficiency of Ethernet decreases. Select the best answer as to why Ethernet becomes less efficient as size increases.
You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?
The cost of picture frame M is Tk. 10.00 less than 3 times the cost of picture frame N. If the cost of frame M is Tk. 50.00, what is the cost of frame N?
The cost of picture frame M is TK. 10.00 less than 3 times the cost of picture frame N. If the cost of frame M is TK. 50.00 , what is the cost of frame N?
Consider the following statements: 1. When the number of members (n) and joints (j) are such that the equation n = (2j — 3) is satisfied, the framed structure is said to be a perfect structure. 2. In a redundant frame, the number of members is less than that required for a perfect frame. 3. If, in a framed structure, the number of members provided is more than that required for a perfect frame, it is called as a deficient frame. Which of the above statements is/are correct ? (a) (b) (c) (d) 
A rod of length L0 makes an angle θ0 with the Y-axis in its rest frame while the rest frame moves to the right along the X-axis with relativistic speed v with respect to lab frame. If $$\gamma = {\left( {1 - \frac{{{v^2}}}{{{c^2}}}} \right)^{ - \frac{1}{2}}},$$    the angle in the lab frame is
Which of the following is, "A device used to connect two separate Ethernet networks into one extended Ethernet."?
_________ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s.
What is the exception in the similarities between the optical Ethernet and the Ethernet LAN?