Bissoy.com
Doctors Medicines MCQs Q&A

_________ implies that all subnets obtained from the same subnet mask.

_________ implies that all subnets obtained from the same subnet mask. Correct Answer Static subnetting

Static subnetting is used when the requirement is of same number of hosts in each subnet for the institution. The same subnet mask can be used to find the subnet id of each subnet. It is usually used to divide large networks into smaller parts.

Related Questions

You are working with a network that has the network ID 10.9.0.0 and contains 73 networks. In the next year, you will be adding an additional 27 branch offices to your company. For simplified management, you want to keep the most possible hosts per subnet. Which subnet mask should you management, you want to keep the most possible hosts per subnet. Which subnet mask should you use?
You have a class A network address 10.0.0.0 with 40 subnets, but are required to add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should you assign?
You have a network ID of 134.57.0.0 and you need to divide it into multiple subnets in which at least 600 host IDs for each subnet are available. You desire to have the largest amount of subnets available. Which subnet mask should you assign?
Your network is configured as shown in the exhibit. "Engineering! and Salesl have DHCP installed up them." All the servers are Windows 2000 Server computers that use TCP/IP as the only network protocol. The sales department uses one subnet and has servers named Salesl and Sales2. The engineering department uses another subnet and has servers named Engineeringl and Engineering2. Salesl and Engineeringl are configured to act as DHCP servers. The router that joins the two subnets is not RFC 1542 compliant and does not support DHCP/BOOTP relay. You want to allow Salesl and Engineeringl to support client computers on each other's subnets. What should you do?
The address of a class B host is to be split into subnets with a 6 - bit subnet number. What is the maximum number of subnets and maximum number of hosts in each subnet ?
The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? 
Consider routing table of an organization’s router shown below: Subnet Number  Subnet Mask Next Hop 12.20.164.0 255.255.252.0 R1 12.20.170.0 255.255.254.0 R2 12.20.168.0  255.255.254.0  Interface 0 12.20.166.0 255.255.254.0 Interface 1  default   R3 Which of the following prefixes in CIDR notation can be collectively used to correctly aggregate all of the subnets in the routing table?
With an IP address set starting with 150, you currently have six offices that you are treating as subnets. Plans are in place to open 10 more offices before the end of the year. What subnet mask should you use to satisfy the needed number of subnets and maximize the number of hosts available at each site?
Which two statements describe the IP address 10.16.3.65/23?
1. The subnet address is 10.16.3.0 255.255.254.0.
2. The lowest host address in the subnet is 10.16.2.1 255.255.254.0.
3. The last valid host address in the subnet is 10.16.2.254 255.255.254.0.
4. The broadcast address of the subnet is 10.16.3.255 255.255.254.0.
You have a network ID of 192.168.10.0 and require at least 25 host IDs for each subnet, with the largest amount of subnets available. Which subnet mask should you assign?