Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is very high, the filter approaches to which of the following filter(s)?
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is of lower order, the filter approaches to which of the following filter(s)?
The filter order of a Butterworth lowpass filter determines whether it is a very sharp or extremely smooth filter function, or an intermediate filter function. Which of the following filters does the filter approach if the parameter value is very high?
Consider three software items: Program-X, Control Flow Diagram of Program-Y and Control Flow Diagram of Program-Z as shown below Program-X: Control Flow Diagram of Program-Y sumcal (int maxint, int value) {       int result=0, i=0;       if (value <0)       {           Value = -value;       }       while ( (i
Toggle Filter আইকনটি-i. Remove filter হিসেবে কাজ করেii. Undo filter হিসেবে কাজ করে iii. Apply filter হিসেবে কাজ করেনিচের কোনটি সঠিক?
Consider a circuit as shown in figure The circuit is (1) Constant K low-pass filter (2) Constant K high-pass filter (3) The m-derived low-pass filter (4) The m-derived high-pass filter
Which of the following statements are correct? 1. A lowpass filter passes low frequencies and stops high frequencies. 2. A highpass filter passes high frequencies and rejects low frequencies 3. A bandpass filter passes frequencies within a frequency band and attenuates frequencies outside the band. 4. A bandstop filter passes frequencies within the band and blocks/attenuates frequencies outside a frequency band.
Statement 1: Filter cake increases the efficiency of filtration. Statement 2: Filter aid is added to the filter cake when the filter cake is the desired product.
_____ clause is an additional filter that is applied to the result.