Bissoy.com
Doctors Medicines MCQs Q&A

If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit.

If the control signals are generated by combinational logic, then they are generated by a type of _______________ controlled unit. Correct Answer Hardwired

The main task of a control unit is to generate control signals. There are two main types of control units: A hardwired control unit generates control signals by using combinational logic circuits and the Micro programmed control unit generates control signals by using some softwares.

Related Questions

In comparing the operation of the half-controlled 2-pulse circuit with that of the fully-controlled circuit, which of the following statements are evident? 1. Since half the thyristors are replaced by diodes, a half-controlled converter costs less than a fully-controlled converter. 2. Due to the freewheeling action with a half-controlled bridge-circuit power factor is improved in half-controlled converters. 3. The AC supply current is more distorted due to its zero periods with the half-controlled circuit, compared to a fully-controlled bridge circuit. Select the correct answer using the code given below :
Consider a control unit generating the control signals. These control signals are divided into five mutually exclusive groups as shown below: Groups  G1  G1  G1  G1  G1 Control  Signals   3  7  10  12  2 How many bits are saved using the Vertical Micro-programmed instead of Horizontal Micro-programmed control unit?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification. A logic circuit required for converting BCD Code to 7 segment Code is known as:
Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
A government official said, “Currently, the traffic signals installed along the roads have a fixed signal timer but with the Japanese technology, signals will automatically change according to the number of vehicles along the road.” Which of the following could be the reason for the statement? I: The installation of smart signals will reduce the waiting time at signals and junctions. II: The installation of smart signals will solve the traffic woes in the city. III: The technology will be an integrated traffic management center that will ease congestion in the city.
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count thereby reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification. In a BCD Subtractor if the sum of minuend and the nine’s complement of the subtrahend is not a valid BCD Code, then which binary number is added to the sum to get the correct answer?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   A ROM is to be used to implement a “Squarer”, which outputs the square of a 3-bit number. What must be the size of the ROM?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification. The minimum number of selection lines required for selecting one of the 16 inputs are:
In which of the below-mentioned logic families, the transistors operate between cut-off and active (non-saturation) states? (i) Transistor-Transistor Logic (TTL) (ii) Schottky TTL (iii) Diode Transistor Logic (DTL) (iv) Emitter Coupled Logic (ECL) Choose the correct answer from the code given below: Code: