SHOW DATABASES lists the databases in the server to which you are connected.

You are the administrator of the Windows 2000 Server network shown in the exhibit. Users in the Research group and the Executive group have permission to access the Internet through a Windows 2000 Server computer running Microsoft Proxy Server. These users must enter their proxy server user names and passwords to connect to the proxy server, to the Internet, and to your local intranet server. The users who do not access the Internet do not have user accounts on the proxy server and, therefore, cannot connect to the intranet server. You want all users to be able to connect to the intranet server without entering a separate user name and password. What should you do?

A

Move the intranet server to the client segment of the network

B

Move the proxy server to the server segment of the network

C

Configure each client computer to bypass the proxy server for local addresses

D

Configure each client computer to use port 81 for the proxy server

E

None of above

You are the administrator of a SQL Server 2000 computer. The server contains a database named FinanceData that is used by a client/server application. Each employee has a SQL Server login that the application uses to access the server.Your company hires a new employee named Andrew. You create a SQL Server login named Andrew. You also create a database user named Andrew in the database and grant the database user full permissions in the database.Whenever Andrew runs the client/server application, he receives the following error message: "Invalid object name." Andrew also reports that he cannot access the database by using the application.You need to ensure that Andrew can use the application. Which Transact-SQL statement should you execute?

A

EXEC sp_defaultdb 'Andrew','FinanceData'

B

GRANT ALL ON FinanceData TO Andrew

C

EXEC sp_addlogin 'Andrew'

D

EXEC sp_grantdbaccess 'FinanceData','Andrew'GOsp_addrolemember 'db_datareader','Andrew'

You are the administrator of a Windows 2000 Server computer. You configure the server to audit all access to files that are places in shared folders. One week after you configured the server, users report that the server has stopped responding. You investigate the problem and discover a stop error with the error message: Stop C0000244 (Audit Failed) An attempt to generate a security audit failed. You restart the computer. You need to ensure that you can keep a record of all files access on the server. You also need to ensure that the stop error will not occur again.

A

Set the CrashonAuditFail registry key to 0

B

Set the Security Log to overwrite events as needed

C

Delete the Liscense Trial registry key

D

Increase the size of the security log

E

Save the security log to a file, and clear it every morning

You install a Windows 2000 Server computer on your network. You place several shared folders on a 12-GB primary partition formatted by FAT32. During nine months of continuous operation, the number of users who access the server and their access frequency remains constant. The average size of the files on the server remains approximately constant. After the server runs continuous for nine months, users report that the server does not retrieve files from the shared folders as fast as when you first installed the server. What should you do to resolve the problem?

A

Convert the disk that contains the shared folders to a dynamic disk

B

Convert the partition that contains the shared folders to NTFS

C

Defragment the disk that contains the shared folders

D

Move the paging file to the partition that contains the shared folders

E

None of above

You configure your Windows 2000 Server as a print server. You install a second PnP Network adapter to improve the performance. The first adapter uses IRQ11, and the second adapter uses IRQ5. The server is now unable to print to print devices connected to a non-PnP LPT2 port adapter. You want to continue to use the print devices connected to your print server. What should you do?

A

Use device manager to change the IRQ for LPT1 to IRQ10

B

Use device manager to change the IRQ for LPT2 to IRQ7

C

Edit the CMOS setting of the servers BIOS to reserve IRQ7 for non-PnP devices

D

Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices

E

None of above

You are the administrator of a Microsoft Windows NT Server 4.0 computer. The server is the PDC in your domain and also runs SQL Server 2000. The server has four processors and 1 GB of RAM.Your network consists of 500 client computers that are running Microsoft Windows Millennium Edition. Users report that when they log on in the morning their computers respond slowly and occasionally return error messages.You use System Monitor to monitor processor performance and RAM utilization. You discover that the % Total Time and % User Time counters average 90 percent and the % Privileged Time counter averages 20 percent. The Available Mbytes counter averages 800 MB. You need to improve server performance for user logons. What should you do?

A

Increase the physical RAM on the computer to 2 GB.

B

Increase the virtual RAM on the computer to 4 GB.

C

Configure SQL Server to use only processors 0, 1, and 2.

D

Configure SQL Server to use only processors 1, 2, and 3.

You are the administrator of a SQL Server 2000 computer. Your company uses the server to store service contract information for its customers. You are also the administrator of an Oracle relational database management system (RDBMS) server. This server is used to store your company's financial information. The financial information is updated frequently throughout the day.You need to create a series of reports that combine the service contract information and the financial information. These reports will be updated several times a day.You want to create these reports on the SQL Server computer by using the minimum amount of disk space. What should you do?

A

Set up SQL Server replication to replicate the data from the Oracle server to the SQL Server computer.

B

Set up the Oracle server as a linked server. Create a view that joins the service contract information and the financial information.

C

Set up a Microsoft ActiveX script that connects to the Oracle server and imports the financial information into a SQL Server temporary table. Create a view that joins the service contract information and the temporary table.

D

Set up a Data Transformation Services (DTS) package that imports and transforms the data from the Oracle server to the SQL Server computer. Use SQL Server Agent to execute the DTS package throughout the day as needed.

You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?

A

Set the second adapters status to disable

B

Configure the first adapter to use a TCP/IP metric of 100

C

Configure the second adapter to use a TCP/IP metric of 25

D

Configure the binding order on the second adapter to bind TCP/IP last

E

None of above

You are a Web developer for XYZ. You create an ASP.NET application that accesses sales and marketing data. The data is stored in a Microsoft SQL Server 2000 database on a server named XYZ01.
The company purchases a factory automation software application. The application is installed on XYZ01, where it creates a second instance of SQL Server 2000 named Factory and a database named FactoryDB. You connect to FactoryDB by using Windows Integrated authentication.
You want to add a page to your ASP.NET application to display inventory data from FactoryDB. You use a SqlConnection object to connect to the database. You need to create a connection string to FactoryDB in the instance of SQL Server named Factory on XYZ01. Which string should you use?

A

?Server=XYZ01;Data Source=Factory; Initial Catalog=FactoryDB;Integrated Security=SSPI?

B

?Server=XYZ01;Data Source=Factory; Database=FactoryDB;Integrated Security=SSP1?

C

?Data Source=XYZ01\\Factory; Initial Category=Factory; Integrated Security=SSP1?

D

?Data Source=XYZ01\\Factory; Database=FactoryDB; Integrated Security=SSP1?

Which of the following statements are true? i) practical application of XOR linked lists are in environments with limited space requirements, such as embedded devices. ii)xor lists are not suitable because most garbage collectors will fail to work properly with classes or structures that don’t contain literal pointers iii)in order to calculate the address of the next node you need to remember the address of the previous node iv)xor lists are much efficient than single, doubly linked lists and arrays

A

i, ii, iii, iv

B

i, ii, iii

C

i, ii

D

i

SHOW DATABASES lists the databases in the server to which you are connected.

Related Questions