In a 1-phase full wave bridge rectifier with M-2 type of connection has secondary side voltage Vs = Vm sin ωt, with R load & ideal diodes. The expression for the rms value of the output voltage can be given by

In a 1-phase full wave bridge rectifier with M-2 type of connection has secondary side voltage Vs = Vm sin ωt, with R load & ideal diodes. The expression for the rms value of the output voltage can be given by Correct Answer Vm/√2

The voltage waveform is a pulsating voltage with peak value Vm & symmetrical about π. Vo = (1/π) ∫π Vm2 sin2ωt d(ωt) = Vm/√2.
Bissoy MCQ

Related Questions

In a 1-phase full wave bridge rectifier with M-2 type of connection has secondary side voltage Vs = Vm sin ωt, with R load & ideal diodes. The expression for the average value of the output voltage can be given by
The value of the expression:sin21° + sin211° + sin221° + sin231° + sin241° + sin245° + sin249° + sin259° + sin269° + sin279° + sin289° is?
A step-down delta-star transformer, with per-phase turns ratio of 5 is fed from a 3-phase 1100 V source. The secondary of this transformer is connected through a 3-pulse type rectifier, which is feeding an R load. The power delivered to the load is 6839.3 Watts. The maximum value of the load current is √2 x 22 A. Fin, the rms value of output voltage Vo (rms)
A transformer has a primary voltage of 120 V rms and a secondary voltage of 25 V rms. If the secondary current is 1A rms, what is the primary current?
A full wave rectifier supplies a load of 1KΩ. The AC voltage applied to diodes is 220V (rms). If diode resistance is neglected, what is the ripple voltage?
An AC voltage of 220 V(rms) is applied to the primary of a 10 : 1 step-down transformer. The secondary of the transformer is centre tapped and connected to a full-wave rectifier with a load resistance. The DC voltage appearing the load is
A single phase full bridge inverter using transistors and diodes is feeding a R load of 3 Ω with the dc input voltage of 60 V. Find the rms output voltage and the peak reverse blocking voltage of each transistor.
Find the expression of the rms value of output voltage for a single-phase M-2 type rectifier with RL load and continues load current. Transformer ratio is 1:1 with supply voltage Vs = Vm sinωt
In a center tapped full wave rectifier, the input sine wave is 200sin50 ᴨt. If load resistance is of 1k then average DC power output of half wave rectifier is __________
The output voltage of 3-Φ Full wave bridge rectifier is six times of 3-Φ Half-wave rectifier.