Bissoy.com
Doctors Medicines MCQs Q&A

What is the formula for the calculation of rotor resistance?

What is the formula for the calculation of rotor resistance? Correct Answer rotor resistance = resistance of the bars + resistance of end rings

First the resistance of the bars are obtained. Next, the resistance of the end rings are calculated and the sum gives the rotor resistance.

Related Questions

In a three rotor system, for the middle rotor, if the stiffness of both the length either side of the rotor is increased to two times what will be the effect on total stiffness of the middle rotor?
I. Maximum torque can be achieved by inserting an additional resistance at desired slip in the rotor. II. Maximum torque can be altered by adding the external resistance in the rotor.
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the slip at which maximum torque occur for the same load torque is?
A 10 kW, 400 V, 3-phase, 4-pole, 50 Hz induction motor develops the rated output at rated voltage with its slip rings shorted. The maximum torque is twice the full load torque occurs at the slip of 10% with zero external resistance in the rotor circuit. An external resistance is now tripled in the rotor circuit. Then the stator current will _________
Which of the following are responsible for occurrence of critical or whirling speed of shaft?  1. Eccentric mounting of the rotor 2. Non-uniform distribution of rotor material 3. Bending of shaft due to the weight of the rotor and the shaft itself 4. Environmental effect such as effect of moisture and temperature Select the correct answer using the code given below.
Consider the following statements: 1. Salient pole alternators have small diameters and large axial lengths. 2. Cylindrical rotor alternators have a distributed winding 3. Cylindrical rotor alternators are wound for large number of poles 4. Salient pole alternators runs at speeds slower than cylindrical rotor machines Which of the above statements are correct?
In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: An induction motor can, therefore, be made without electrical connections to the rotor. B: Three-phase squirrel-cage induction motors are widely used as industrial drives because they are self-starting, reliable and economical. C: An induction motor's rotor can be either wound type or squirrel-cage type. D: An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.
Which of the following equation best represents the mutual inductance between stator and rotor in a single phase cylindrical rotor synchronous machine? (where θr= space angle between stator and rotor field axis)
An electromechanical energy conversion device has cylindrical stator but salient pole rotor. Rotor is not excited. If δ is the angle between stator field and rotor long axis, then average torque developed is proportional to (A and B are constants).
In a three phase induction motor of rotor impedance as (0.2+j0.2), rotor current in each phase lags behind the generated emf in that phase to rotor by a power factor angle of _________