Bissoy.com
Doctors Medicines MCQs Q&A

Have a look on the below diagram Here, DE and DP are the operating line. Also Y and X are the concentrations in mole ratio for gas and liquid phase. It’s clearly a representation of an absorber. For the operating line DE minimum liquid is required

Have a look on the below diagram Here, DE and DP are the operating line. Also Y and X are the concentrations in mole ratio for gas and liquid phase. It’s clearly a representation of an absorber. For the operating line DE minimum liquid is required Correct Answer False

DP line requires minimum liquid because the composition is increased to X2.

Related Questions

In a concurrent process, the entering and leaving stream of the liquid phase concentrations in terms mole ratio is 0.25 and 0.45 also the entering and leaving stream concentration of the gas phase in terms mole ratio is 0.4 and 0.6 Find the slope of the operating line.
Experiments were conducted to determine the flux of a species A in a stagnant medium across a gas-liquid interface. The overall mass transfer co-efficient based on the liquid side for dilute systems for the above was estimated to be 4 × 10-3 kg mole/m2.s. The equilibrium data for the system is given as y = 2x. The flux across the interface (in kg mole/m2.s) for bulk concentrations of A in gas phase and liquid phase as y = 0.4 and x = 0.01 respectively is
Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?
Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?
Three feeds, 10 mole with H = 5 J/mole, 10 mole with H = 15 J/mole and 5 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 25 J/mole, 5 mole with H = 10 J/mole and 15 mole with 20 J/mole, what is the enthalpy of the products?
Three feeds, 10 mole with H = 15 J/mole, 20 mole with H = 5 J/mole and F1 with 20 J/mole, if enthalpy of the products is H = 15 J/mole, what is the value of F1?
Statement 1: Boiling point concentration diagram plots y against x. (Mole fraction in gas and liquid phase respectively). Statement 2: VLE curve plots y against x. (Mole fraction in gas and liquid phase respectively).
Find the operating line slope Where, X,Y- concentration in mole ratio of liquid and gas phase x,y-concentration in mole fraction Gs,Ls- mole free basis( non-diffusing solvent)
Find the representation Where, Y- gas phase concentration in mole ratio X-liquid phase concentration in mole ratio