Bissoy.com
Doctors Medicines MCQs Q&A

Heat transfer coefficients for natural convection across the surface of a vertical pipe and a vertical flat plate at the same height. What could be the cause(s) of this? (i) Same height (ii) Both vertical (iii) Same fluid (iv) Same fluid flow pattern Select the correct answer

Heat transfer coefficients for natural convection across the surface of a vertical pipe and a vertical flat plate at the same height. What could be the cause(s) of this? (i) Same height (ii) Both vertical (iii) Same fluid (iv) Same fluid flow pattern Select the correct answer Correct Answer iii and iv

The fluids must be same so their flow pattern.

Related Questions

Natural convection heat transfer coefficients over surface of a vertical pipe and a vertical flat plate for same height. What is/are the possible reasons for this? (i) Same height (ii) Both vertical (iii) Same fluid (iv) Same fluid flow pattern Select the correct answer
A stream of air at 100 kPa pressure and 300 K is flowing on the top surface of a thin flat sheet of solid naphthalene of length 0.2 m with a velocity of 20 m/sec. The other data are: Mass diffusivity of naphthalene vapor in air = 6 * 10 –6 m2/sec Kinematic viscosity of air = 1.5 * 10 –5 m2.sc Concentration of naphthalene at the air-solid naphthalene interface = 1 * 10 – 5 kmol/m3 Calculate the overage mass transfer coefficient over the flat plate. Note: For heat transfer over a flat plate, convective heat transfer coefficient for laminar flow can be calculated by the equation. Nu = 0.664 ReL1/2 Pr1/3 you may use analogy between mass and heat transfer.
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
Experimental results indicate that the local heat transfer coefficient h g for flow over a flat plate with an extremely rough surface is approximated by the relation h x = a x -0.12 Where a is a constant coefficient and x is distance from the leading edge of the plate. What is the relation between this local heat transfer coefficient and the average heat transfer coefficient for a plate of length x?
A container of 425 liters was filled with chemicals through two pipes. The first pipe was kept open for 5 hours more than the second pipe. If the first pipe remains open for as long as the second pipe remains open, and the second pipe remains open for as long as the first pipe remains open, then the quantity of chemical filled by the first pipe was half the quantity of chemical filled by the second pipe. If both the pipes are opened simultaneously, the tank will be filled in 17 hours. For how long was the second pipe open?
Pipe A takes 10 hours more than Pipe B to fill a tank. Pipe C(which is equally efficient as Pipe A and Pipe B together), fills the same tank in 12 hours. In how many hours will Pipe A, Pipe B and Pipe C fill the tank if Pipe A is accompanied by B and C on alternate hours.
Four pipes P, Q, R and S are connected to a tank. Pipe P, Q, R and S can fill the whole tank in 300/37 minutes. Ratio of time taken by pipe P to fill the tank when operating alone and pipe Q to fill the tank when operating alone is 3 : 2, pipe Q is 20% more efficient then pipe R and time taken by pipe S is 10 minutes more than pipe R. Find difference between time taken by pipe Q and pipe P to fill up the tank alone. 
To fill the tank Pipe A and Pipe B takes 12hours. Pipe B and Pipe C takes 9 hours to fill the tank and Pipe C and Pipe A together take 15 hours to fill the tank. Find the time taken to fill the tank when Pipe A, Pipe B and Pipe C opened together(approximately).