Bissoy.com
Doctors Medicines MCQs Q&A

In control system excessive bandwidth is not employed because

In control system excessive bandwidth is not employed because Correct Answer Noise is proportional to bandwidth

In closed loop system the bandwidth of the system is more as compared to the open loop system and this is so required as higher the bandwidth means lower the selectivity and hence higher the noise.

Related Questions

Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
Based on the given para, answer the following question. Sensitivity considerations often are important in the design of Control Systems. Because all physical elements have properties that change with environment and age, we cannot always consider the parameters of the Control System to be completely stationary over the entire operating life of the system. For instance, the winding resistance of an electric motor changes as the temperature of the motor rises during operation. Control systems with electric components may not operate normally when first turned on because of the still-changing system parameters during warmup. This phenomenon is sometimes called “morning sickness”. Most duplicating machines have a warmup period during which time operation is blocked out when first turn on. A good Control System should be: (a) Very sensitive to parameter variations (b) Insensitive to parameter variations (c) Insensitive to input commands (d) Sensitive to input commands Which of the above are correct?
Due to which of the following reason excessive bandwidth in control system should be avoided?
Workstations connected to a port on a modern lOBase-T Ethernet HUB all use the same bandwidth, i.e. the bandwidth is shared across all available ports, the less ports, the less bandwidth available per port
A contractor employed 30 men to do a piece of work in 38 days. After 25 days , he employed 5 men more and the work was finished one day earlier. How many days he would have been behind, if he had not employed additional men?
Three statements are followed by three conclusions numbered I, II and III. Assuming the statements to be true even if they do not conform to real-world knowledge, decide which of the conclusions logically follows/follow from the statements. Statements: 1. All uncles are relatives. 2. Some relatives are neighbours. 3. All neighbours are employed. Conclusions: I. Some neighbours are uncles. II. Some uncles are employed. III. Some relatives are employed.
Consider a control unit generating the control signals. These control signals are divided into five mutually exclusive groups as shown below: Groups  G1  G1  G1  G1  G1 Control  Signals   3  7  10  12  2 How many bits are saved using the Vertical Micro-programmed instead of Horizontal Micro-programmed control unit?
Examine the following statements about span of control and identify the ones which are true?
1. More task complexity requires narrower span of control.
2. Routine tasks can have greater span of control than exceptional tasks.
3. When tasks are dissimilar, then span of control can be larger.
4. Spans of control are generally narrower at the top and broader at the bottom of the hierarchy.
The following bar graph shows the total number of youth (in lakhs) and the number of employed youth (in lakhs) in 5 states A, B, C, D and E. The number of employed youth in state B is what percentage of the number of employed youth in state E?
Mr. stenley employed a certain number of typist for his project. 8 days later 20% of the typist left the job and it was found that it took as much time to complete the rest work from then as the entire work needed with all the employed typists. The average speed of a typist is 20 pages/hour. Minimum how many typist could be employed?