A triode valve of anode slope resistance `20 kOmega` is used with an anode load resistance of `50 kOmega`. If an alternating signal of 0.5 V (rms valu

Question

A triode valve of anode slope resistance `20 kOmega` is used with an anode load resistance of `50 kOmega`. If an alternating signal of 0.5 V (rms valu

A triode valve of anode slope resistance `20 kOmega` is used with an anode load resistance of `50 kOmega`. If an alternating signal of 0.5 V (rms value) is applied to the grid, find the output if the amplification factor of the valve is 15.

Monjur Alahi

4 views

2025-01-04 04:42

1 Answers

Related Questions

In a series `LCR` circuit with an AC source, `R = 300 Omega, C = 20 muF, L = 1.0 henry, epsilon_(rms) = 50 V` and `v = 50/(pi) Hz`. Find (a) the rms c

2 Answers 7 Views

The peak value of an alternating current is 5A and its frequency is 60Hz. Find its rms value. How long will the cukrgrenQt current IS 5 A and its freq

2 Answers 5 Views

In a certain triode, the output is 5 mA with an anode potential of 200 V and grid potential `-3V`. When he potential is increased to 260 V, the curren

2 Answers 5 Views

The voltage of a triode amplifier with a resistive load of `5 kOmega` is 10 while with a resistive load of `12 kOmega`. It is 15. Calculate the amplif

2 Answers 5 Views

The plate resistance of a triode is `7.7 kOmega`, and the transconductanace is 2.6 millimho. If only the plate voltage is increased by 50 V, what is t

2 Answers 4 Views

In triode valve, for a grid voltage `V_(g) = -1.2 V`, the plate current `I_(p)` (in mA) ad the plate voltage are given by the relation `I_(p) = -50 +0

2 Answers 4 Views

In a transistor collector load is `4 kOmega` whereas the zero signal current is 1 mA. (a) What is the operating point if `V_(C C) = 10 V` ? (b) What w

2 Answers 4 Views

A capacitor of `1.443 muF` capacitance after being charged is shunted by a high resistance. If half the charge leaks away in one minute, find the valu

2 Answers 5 Views

In common-emitter transistor amplifier the load resistance of the output circuit is 1000 times the load resistance of the input circuit. If `alpha=0.9

2 Answers 4 Views

Find the equation of the line whose (i) slope=3 and y-intercept=5 (ii) slope=-1 and y-intercept=4 (iii) slope =`-(2)/(5)` and y-intercept=-3

2 Answers 5 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Correct Answer - 5.36 V

4 views Answered 2023-02-05 15:29