If an alternating voltage is applied across a diode in series with a load, then

Question

If an alternating voltage is applied across a diode in series with a load, then

If an alternating voltage is applied across a diode in series with a load, then
A. a DC voltage appears across load
B. an AC voltage appears across load
C. a pulsating voltage appears across load
D. no voltage appears across load

Monjur Alahi

5 views

2025-01-04 04:42

1 Answers

Related Questions

If 8 cells having an emf of 1.5 V are connected in series across a load having resistance of `10 Omega`. What is the current drawn by the load ? Assum

2 Answers 4 Views

An alternating potential `E=E_(0) sin omega t` is applied to a series L-C circuit. What is the phase difference between the voltage across L and C?

2 Answers 4 Views

An alternating voltage is applied to a series L-C-R circiut. If the current leads the voltage by `45^(@)`, then

2 Answers 4 Views

An alternating e.m.f. of 0.1 V is applied across an LCR series circuit having `R = 2 Omega, C = 40 mu F and L = 100 mH`. At resonance, the voltage dro

2 Answers 7 Views

In an LCR series circuit, the voltage across each of the components L,C and R is 20 V. The voltage across the L-C combination will be

2 Answers 5 Views

In an LCR series a.c. circuit, the voltage across each of the components L,C, and R is 60 V. What is the voltage across the LC combination ?

2 Answers 10 Views

In a circuit a diode was used and the output voltage across the diode was always 50 volts, even if the input voltage fluctuated between 110 V to 90 V.

2 Answers 6 Views

An inductance of 100 mH and a resistance of 100 `Omega` are connected in series and an alternating emf of peak value 100 V, 50 Hz is applied across th

2 Answers 5 Views

In inductance of `(4//pi)` H and the resistor R, are connected in series and an alternating emf of frequency 50 Hz is applied across combination. If p

2 Answers 6 Views

An a.c. voltage of peak value 20 V is connected in series with a silicon diode and a load resistance of 500 G. The forward resistance of the diode is

2 Answers 4 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Correct Answer - C
If an alternating voltage is applied across a diode in series with a load, a pulsating voltage will appear across the load only during the half cycles of the AC input during which the diode is forward biased.

5 views Answered 2023-02-05 15:29