1 Answers
An aquifer test is conducted to evaluate an aquifer by "stimulating" the aquifer through constant pumping, and observing the aquifer's "response" in observation wells. Aquifer testing is a common tool that hydrogeologists use to characterize a system of aquifers, aquitards and flow system boundaries.
A slug test is a variation on the typical aquifer test where an instantaneous change is made, and the effects are observed in the same well. This is often used in geotechnical or engineering settings to get a quick estimate of the aquifer properties immediately around the well.
Aquifer tests are typically interpreted by using an analytical model of aquifer flow to match the data observed in the real world, then assuming that the parameters from the idealized model apply to the real-world aquifer. In more complex cases, a numerical model may be used to analyze the results of an aquifer test.
Aquifer testing differs from well testing in that the behaviour of the well is primarily of concern in the latter, while the characteristics of the aquifer are quantified in the former. Aquifer testing also often utilizes one or more monitoring wells, or piezometers. A monitoring well is simply a well which is not being pumped. Typically monitoring and pumping wells are screened across the same aquifers.