In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases.?

Percentage elongation
Brinell hardness
Tensile strength
All of the above

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

5 views Answered 2022-09-01 13:21

Related Questions

Admiralty brass used for steam condenser tubes contains copper and zinc in the following ratio?

1 Answers 4 Views

Muntz metal contains copper and zinc in the ratio of?

1 Answers 4 Views

The disinfection efficiency of chlorine increases by (i) Decreasing the time of contact (ii) Decreasing the temperature of water (iii) Increasing the temperature of water?

1 Answers 4 Views

In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following :?

1 Answers 6 Views

Protection of ship hulls against sea water corrosion is done by coating with zinc because of the fact that zinc compared to iron is?

1 Answers 5 Views

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m² of steel strip.?

1 Answers 5 Views

Duralumin is an alloy of aluminium and copper. Percentage of copper in duralumin is?

1 Answers 4 Views

In the converter of the contact process for the manufacture of H₂SO₄ the equilibrium conversion of SO₂ __________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio of SO₂ to air.?

1 Answers 6 Views

Galvanising is not a zinc diffusion process. A zinc diffusion process is termed as?

1 Answers 4 Views

Large process vessels operating under extreme temperature and pressure conditions are normally clad/ lined with materials like stainless steel, aluminium, nickel & its alloys, copper & its alloys and titanium. The cladding thickness is generally about __________ percent of the total thickness.?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)