If A is the area of the surface, x̅ is the depth of its C.G. from the surface of the water and ω is the density of water, then?

Total pressure on the surface is equal to ωx̅
Depth of the point at which total pressure acts is equal to its moment of inertia divided by Ax̅
Depth of the centre of pressure is 2/3H vertically below the surface
All the above

LohaHridoy

10 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 4

10 views Answered 2022-09-01 13:21

Related Questions

If the depth of actual neutral axis in a beam is more than the depth of critical neutral axis, then the beam is called?

1 Answers 4 Views

The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.?

1 Answers 17 Views

A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.?

1 Answers 7 Views

The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.?

1 Answers 11 Views

Moment of inertia of a rectangular section having width (b) and depth (d) about an axis passing through its C.G. and parallel to the depth (d), is?

1 Answers 5 Views

If the depth of water in an open channel is less than the critical depth, the flow is called?

1 Answers 5 Views

If the depth of water in an open channel is greater than the critical depth, the flow is called?

1 Answers 4 Views

A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is?

1 Answers 7 Views

In a doubly-reinforced beam if ‘c’ and ‘t’ are stresses in concrete and tension reinforcement, ‘d’ is the effective depth and ‘n’ is depth of critical neutral axis, the following relationship holds good?

1 Answers 5 Views

If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is Φs is defined by?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)