A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is?

zero
one-fourth its value when cylinder was full
one-half its value when cylinder was full
cannot be predicted from the given data

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

4 views Answered 2022-09-01 13:21

Related Questions

In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided oni) bottom face near counterfortii) top face near counterfortiii) bottom face near centre of spaniv) top face near centre of span The correct answer is?

1 Answers 6 Views

The main reinforcement in the toe of a T- shaped R C. retaining wall is provided oni) top face parallel to the wallii) top face perpendicular to the walliii) bottom face paralleUo the walliv) bottom face perpendicular to the wallThe correct answer is?

1 Answers 4 Views

In order to have a connecting rod equally strong in buckling about X-axis and Y-axis, the moment of inertia about X-axis should be __________ the moment of inertia about Y-axis.?

1 Answers 7 Views

The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and re-condensed, then the liquid with the next higher boiling point is then evaporated and re-condensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called?

1 Answers 5 Views

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface.?

1 Answers 4 Views

The total pressure on the top of a closed cylindrical vessel of radius (r) completely filled up with liquid of specific weight (w) and rotating at (ω) rad/s about its vertical axis, is?

1 Answers 9 Views

If p₁ is the pressure of air entering the L.P, cylinder and p₃ is the pressure of air leaving the H.P. cylinder, then the ratio of cylinder diameters for a single acting, two stage reciprocating compressor with complete intercooling is given by?

1 Answers 4 Views

If p₁ and p₂ are effective lateral loadings at the bottom and top exerted by a level earth subjected to a super-load on the vertical face of height h of a retaining wall, the horizontal pressure p per unit length of the wall, is?

1 Answers 4 Views

For a fluid rotating at constant angular velocity about vertical axis as a rigid body, the pressure intensity varies as the?

1 Answers 4 Views

A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is?

1 Answers 7 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)