The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is?

Less than 1
Equal to 1
Greater than 1
Less than 1 in beams but greater than 1 in channels

LohaHridoy

11 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

11 views Answered 2022-09-01 13:21

Related Questions

The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.?

1 Answers 7 Views

In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be?

1 Answers 5 Views

Structural sections such as rails, angles, I-beams are made by?

1 Answers 5 Views

In a marine flange coupling, the thickness of flange is taken as?

1 Answers 6 Views

Assertion A : From consideration of structural soundness and economy of design, most codes control the maximum slenderness ratio of masonry walls and columns.Reason R : By controlling the maximum slenderness ratio, failure is by excessive stress and not by buckling. Select your answer according to codes given below:?

1 Answers 4 Views

The allowable tensile stress in structural mild steel plates for steel tank is assumed as?

1 Answers 13 Views

The correct relationship among displacement thickness d, momentum thickness m and energy thickness e is?

1 Answers 4 Views

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m² of steel strip.?

1 Answers 5 Views

Poisson's ratio of a material is the ratio of unit lateral strain to the unit axial elongation within its elastic limit. The value of Poisson's ratio for structural and pressure vessel steel may be taken as?

1 Answers 5 Views

Large process vessels operating under extreme temperature and pressure conditions are normally clad/ lined with materials like stainless steel, aluminium, nickel & its alloys, copper & its alloys and titanium. The cladding thickness is generally about __________ percent of the total thickness.?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)