The lines used to create the auxiliary view should appear as ________ in the finished view.?

Object lines
Construction lines
Reference lines
Construction lines

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

5 views Answered 2022-09-01 13:21

Related Questions

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.?

1 Answers 4 Views

The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.?

1 Answers 4 Views

In order to create an accurate assembly drawing the drafter should create the ________ drawings first.?

1 Answers 6 Views

In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:?

1 Answers 4 Views

This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:?

1 Answers 4 Views

A secondary auxiliary view is a projection off of the __________.?

1 Answers 4 Views

In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.?

1 Answers 4 Views

Center lines are used to locate or represent the centers of ________.?

1 Answers 4 Views

The principle reason for using an auxiliary view is ________.?

1 Answers 4 Views

The instantaneous centre of a member lies at the point of intersection of two lines drawn at the ends of the member such that the lines are inclined to the direction of motion of the ends at?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)