Lap joints are employed on plates having thickness?

Less than 3 mm
5 to 10 mm
12.5 mm
Above 25 mm

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

A lap joint or overlap joint is a joint in which the members overlap. Lap joints can be used to join wood, plastic, or metal. Lap joints are employed on plates having thickness Less than 3 mm

4 views Answered 2022-09-01 13:21

Related Questions

In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be?

1 Answers 5 Views

The number of armature parallel paths in a two-pole D.C. generator having duplex lap winding is?

1 Answers 6 Views

In a steam engine, one method of obtaining the earlier cut-off with a simple slide valve is by increasing the angle of advance of the eccentric while the throw of the eccentric, steam lap and exhaust lap are kept constant. This method will?

1 Answers 4 Views

These types of pipes are generally connected with bell and spigot joints or flanged joints:?

1 Answers 8 Views

The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints?

1 Answers 5 Views

The actual thickness of butt weld as compared to the thickness of plate is usually?

1 Answers 6 Views

The minimum thickness of plates in a steel stack should be?

1 Answers 4 Views

As compared to stretcher course, the thickness of joints in header course should be?

1 Answers 4 Views

The correct relationship among displacement thickness d, momentum thickness m and energy thickness e is?

1 Answers 4 Views

If the height of the hydraulic gradient line above the floor of thickness t is h and the specific gravity of the material of the floor is G, the minimum thickness t of the floor downstream of the crest-wall, is given by the equation?

1 Answers 9 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)