Which of the following test is used for distinguishing among dry oils, semi-drying oils and non drying oils?

Elaiden test
Reichart-Meissl value test
Henter value test
Iodine value test

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

Let'

4 views Answered 2022-09-01 13:21

Related Questions

The ratio of the actual mass of water vapour in a unit mass of dry air to the mass of water vapour in the same mass of dry air when it is saturated at the same temperature and pressure, is called?

1 Answers 5 Views

Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as __________ oil.?

1 Answers 4 Views

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process?

1 Answers 5 Views

A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)?

1 Answers 5 Views

The bypass factor (B. P. F.) in case of sensible heating of air is (Where td₁ = Dry bulb temperature of air entering the heating coil, td₂ = Dry bulb temperature of air leaving the heating coil, and td₃ = Dry bulb temperature of heating coil)?

1 Answers 5 Views

The bypass factor, in case of sensible cooling of air, is given by (where td₁ = Dry bulb temperature of air entering the cooling coil, td₂ = Dry bulb temperature of air leaving the cooling coil, and td₃ = Dry bulb temperature of the cooling coil)?

1 Answers 5 Views

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid )?

1 Answers 6 Views

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid )?

1 Answers 5 Views

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres.?

1 Answers 5 Views

Mr. X has been invited to participate in a conference to be held at Buenos Aires. He has chosen the following shortest flight route: Mumbai to Frankfurt (non-stop) Frankfurt to Sao Paulo (non-stop) Sao Paulo to Buenos Aires (non-stop). Which one of the following seas will likely to be flown over by Mr. X?

1 Answers 4 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)